Single component rubber waterproof coating
Yunyan Single component rubber waterproof coating bring in the latest foreign technology, using imported technology
and raw material to produce a new type of pure polyurethane
waterproof coating, it overcomes the two-component polyurethane waterproof coating nee
to blend before using, and mixing uneven will cause performance decline, etc.
1. Pure polyurethane, curing film after the coating to absorb moisture
in the air and base moisture;
2. One-component does not need to mix, the coating will become
tenacity and high elastic after curing;
3. The adhesive power is strong, stable performance, heat resistant to
cold an hot(-4095 ℃), chemical corrosion resistance, ageing
4. The basic color is brown red , also can make other colors.
Scope of application
1. The structure of the flat and sloping roof, roof gutter, canopy,
basement, floor, bathroom, parterre, waterproof engineering of the
2. All kinds of sealed waterproof for doors and windows, the cracks.
1. The construction base should level and smooth, clean,firm and dry;
2. Coating thickness is greater than 2 mm, can be divided into 2-3
times to scrape and brush, the interval time is according to above
coating do not glue the hand, the scrape and bursh direction of the
coating should be perpendicular to each other;
3. Reference dosage(1mm thickness) 1.2-1.5kg/The thickness of the construction is 1.2-2.0/mm.
1. Seal immediately after opening, to prevent curing and scrap
cause absorption of moisture, advice to use up for one-time after
2. When product storage period is long, there is a thin layer of glue
on the coating surface , get rid of the layer when using, shall not
affect the use;
3. The construction temperature should be above 5 ℃, construction
environment should keep ventilation.
Shipping and packaging
1. This product is not flammable items,should prevent crashing
during transportation, weathered, keep the package complete;
2. Packed in sealing iron drum , storage period is 6 months, 25