Sign In | Join Free | My bjjsgy.com
bjjsgy.com
Products
Search by Category
Home > Electronics Packaging >

Black Bituminous Anticorrosive Paint Protective Bridge Pier

Categories Protective Coating Paint
Brand Name: Huisins
Model Number: 725-L44-02
Certification: ROHS/SGS/ISO
Place of Origin: China
MOQ: 500L
Price: negotiation
Payment Terms: L/C, D/P, T/T
Supply Ability: 2,000MT per month
Delivery Time: 15 working days after received your payment
Packaging Details: 10.Part A 20.7kg/13.5L in 20L container Part B 6.9KG/6.5L in 20L container
Main Raw Material: Bituminous
Application Method:: Spray
Type: Topcoat
Color: Multiple Colors As Customers' Need
Luster: Seim-Gloss
Corrosion resistance: Corrosion resistance
Thickness: 75 microns dry ( 120 microns wet)
Coating Thickness: 8.3㎡/L at typical film thickness
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    • Product Details
    • Company Profile

    Black Bituminous Anticorrosive Paint Protective Bridge Pier

    Bituminous Anticorrosive Paint –Black


    Product Description

    • A quick one pack bituminous anticorrosive paint
    • VOC less than 350 g/L

    Intended Uses

    • Economic anticorrosive coatings for use in all under water areas.
    • For use at Newbuilding, Maintenance and Repair or Maintenance

    Product Information

    • Volume Solids 63%±3%
    • Finish/Sheen matt
    • Typical Film Thickness 75 microns dry ( 120 microns wet)
    • Theoretical Coverage : 8.3㎡/L at typical film thickness
    • Mix Ratio: one pack
    • Method of Application

    Airless Spray Tip size range 0.38-0.53mm

    Output Pressure ≥17MPa

    Air Spray Tip size range 2-3mm

    Output Pressure ≥0.4MPa


    Brush/Roller Need to coat several times to get film thickness

    • Thinner : Not recommended .Use water only in exceptional circumstances(max 5% by volume)

    • Drying Information -5°C 5°C 25°C 35°C

    Touch Dry 2H 1H 30min 15min

    Hard Dry 48H 36H 24H 12H

    Pot Life Not applicable

    Overcoatings Data : Substrate Temperature

    Overcoated By -5°C 5°C 25°C 35°C

    Min Max Min Max Min Max Min Max

    725-L44-02 48H no 36H no 24H no 24H no

    725-B40-6 48H no 36H no 24H no 24H no

    • Storage :Store in cool and dry conditions, Well ventilate. Keep away from hot and fire.Store temperature should be higher than 0°C.

    Shelf Life: 12Months minimum at 25°C.Subject to re-inspection thereafter.


    • Pack Size : 28kg/17L in 20L container
    • Flash Point Greater than 28°C

    Surface Preparation:

    1. High pressure fresh water wash or fresh water wash, as appropriate, and remove all oil or grease, soluble contaminants and other foreign matter in accordance with SSPC-SP1 solvent cleaning. All surfaces to be coated should be clean, dry and free from contamination.

    2. Newbuilding

    Remove weld spatter and smooth weld seams and sharp edges. The surfaces should be blast cleaned to Sa2.5(GB/T8923-1988). The weld seams areas could be to St3(GB/T8923-1988)

    Apply 725-L44-02 before oxidation occurs. If oxidation has occurred, The entire oxidized area should be reblasted to the standard specified above.

    • Repair/On Board Maintenance

    The areas to be required should be cleaned to St3(GB/T 8923-1988) by mechanical method or higher level of surface prepared to Sa2.5 by abrasive blasting. Abrade the area immediately surrounding the repair to provide a key for subsequent coating application. Overlap areas should be kept to minimum.


    Limitations

    • Apply in good weather, Temperature of the surface to be coated must be least 3°C above the dew point when the humidity is lower than 85%
    • The dry time and over coating interval may change according to the environment factors.
    • Forbid to trample or pullute the surface of AF3-1 and coat the next paint before the film is hard dry.


    Quality Black Bituminous Anticorrosive Paint Protective Bridge Pier for sale
    Send your message to this supplier
     
    From:
    Enter your email please.
    To: Huisins New Material Technology Co., Limited
    Subject:
    Message:
    Characters Remaining: (0/3000)
     
    Inquiry Cart 0

    Home| Products| Suppliers| Quality Suppliers| Site Map |About Us |Contact Us |Help |关于我们 |联系我们

    Copyright © 2009 - 2018 bjjsgy.com. All rights reserved.