Paremeter of Galvanizated Malleable Elbows With Rib
|Standard||Thread: ISO 7/1|
|Dimension||ISO 49, DIN 2950,EN10242|
|Chemical property||(C %2.4-2.9), (Si %1.4-1.9), (Mn %0.4-0.65), (P% <0.1), (S%
|Physical property||Tensile strength>=350Mpa,Elongation>=10% Hardness<=150HB|
|Type||Beaded with ribs or banded with ribs|
|Beaded without ribs or banded without ribs|
|Surface||Galvanized/ no galvanized|
|Model||Elbow, Tees, Crosses, Bends, Unions, Bushings, Lateral Braches,
Sockets, Nipples, Hexagon/Round, Caps, Plugs, Locknuts, Flanges
,Side Outlet Tees, Side Outlet Elbows and etc|
|Application||Suitable for pipe connect of steam, air, gas, oil and so on|
|Buyer’s drawings or designs are available|
|Package||Cartons without pallet|
|Cartons with pallet|
|Double woven bags|
|Or as buyer’s requirements|
|Delivery details||According to the quantities and specifications of each order|
|Normal delivery time is from 30 to 45 days after receiving the
ASTM 90 Deg Metric Fitting Galvanizated Malleable Iron Elbows With
The function of casting sand will affect the quality of the pipe
fitting. The humidity, air permeability , sediment percentage and
other functions all have big effect on rough casting. If the
moulding sand is not ok , then it will lead to lot of problems like
air hole , sand hole , sticky sand . K&F use the advanced
equipments from DISA Denmark, DJ AMF Japan, SINTOKOGIO Japan , make
sure the excellent performance of casting molding sand.
How about Galvanizated Malleable Elbows With Rib ?
State of the art equipments with automatic production line, making
high-quality products efficiently.
Thread processed is exactly based on ASME EN BS DIN standard
requirements, so that make every thread of elbows can be matched
The outlets ranging from 1/8” through 8”.
A:How is the working life ?
Q: Good toughness with long working life .
A: How is the surface ?
Q: Smooth surface without any sand hole.