12MP Full HD 1080P Wildlife Monitoring Camera hunting camera motion
activated with IP67 waterproof and 2.0' LCD
Brief Introduction for UV595-HD Trail Camera
UV595-HD is the improved camera on the basis of UOV's UV565-HD.
This camera is very easy to set, options are also very simple and
user-friendly. At the same time,It has more programming (timing)
options than the competition.
Durability is still the outstanding feature for this camera. We
have experienced minimal returns on this unit and in years past the
UOV cameras had very low return rates. All in all, the durability
of UOV 2016 UV595-HD is outstanding.
With the latest firmware in this camera, we believe that UOV UV595-HD is still a tremendous value. Quick trigger time, excellent
recovery, top-notch battery life and durability to last. This
camera is a workhorse, throw in a set of batteries and an SD card
and let this camera go to work for you.
12MP invisible IR camera;
0.65s trigger speed;
HD resolution: 720P/1080P
940nm NO Glow black LEDs with 12m flash range
SD card overwrite to ensure cycle use
2.0” Color TFT
To supply power for the camera, 4, 8 or 12 size AA batteries are
Confirm that the power switch is at OFF position; load fully charged batteries into the depot according
the polarities signs shown below. The following batteries with 1.5V
output can be used:
1. High-density and high-performance alkaline batteries
2. Rechargeable alkaline batteries
3. Rechargeable NiMH batteries
There are 6 battery slots. Slot1 and Slot2 form one group and is
marked as “1”, slot3 and slot4 form the other group and is marked
as “2”, while slot 5 and slot6 form the third group and is marked
as “3”. Single “group” of batteries is needed to supply power to
the camera, but two groups together can support camera for a longer
Mounting and Posititoning the CAM
There are two ways to mount the Cam.
1.Using the adjustable web belt:Push one end of the belt through
the two brackets on the back of
the Cam. Thread one plastic buckle part onto each end of the belt.
Fasten the belt around
the tree trunk by clicking the buckle ends together.
2. Using the tripod socket: The camera is equipped with a socket at
the bottom end to enable mounting
on a tripod or other mounting accessories with a standard 1/4-20
Sensing angle and distance test
This test is recommended to check the sensing angle and monitoring
distance of the Cam. To perform the test:
1.Switch the Cam to the SETUP mode.
2.Make movements in front of the camera at several positions within
the area where you expect the
game or subjects to be. Try different distances and angles from the
3.If the motion indicator LED light blinks, it indicates that
position can be sensed. If it does not blink, that
position is outside of the sensing area.
The results of your testing will help you find the best placement
when mounting and aiming the Cam.The
height away from the ground should vary with the animal size
appropriately. In general, 3 to 6 feet is preferred.
UV595-HD Main specifications:
12MP, 8MP (Interpolated),
Real 5MP, 3MP
|Memory Card||Up to 32GB|
|PIR Sensor||Multi Zone|
|PIR Sensitivity||Adjustable (High/Normal/Low)|
|Weight||0.37 kg(without battery)|
|Operation/Storage Tem.||-20 - +60°C / -30 - +70°C|
|Trigger Interval||0s – 60 min.|
5‐55 second (in 5 second increments)；
1‐59 minutes(in 1 minute increments)；
1-8 hours(in 1 hour increments)；
|Power Supply||4×AA, 8×AA or 12AA|
|Stand-by Current||< 0.25 mA (<6mAh/Day)|
600 videos(interval=5min,video length=10s);
>800 MMS(use 12*AA batteries)
|Low Battery Alert||LED Indicator|
|Dimensions||117 x147 x74 mm|
|Operation Humidity||5% - 90%|
|Security authentication||FCC, CE, RoHS|
The day pictures of UV595-HD are very sharp. Maximum pixels can
reach 12MP. Color, clarity and focus are exactly what we like to
The night pictures are also surprisingly clear and bright,
especially for this no glow trail camera . You can click on any of
the images below to see exactly what we are talking about.