High Speed UV Coating Machine Spot and Overall - ECOO HIS-1450
The HIS series of UV local glazing machine adopt the Bite-transferring structure and chain track design of offset
printing pree. The drying section is a conveyor net structure,
adopt the large diameter impression cylinder, so the finished oil
film is very flat and even, accurate and bright. It can
comprehensive think about both thick and thin papers, and can be
used for both full UV and partial UV coating.
Model: Ecoo HIS0-1100/1280/1450
Max. Sheet Size: 1100x1100mm; 1100x1280mm; 1100x1450mm
Min. Sheet Size: 310X406mm; 350X460mm; 350X460mm
Max. Coating Size: 1090x1090mm; 1090x1270mm; 1090x1440mm
Sheet Thickness: 80-600gsm; 128-600gsm
Production Speed: 6800sheets/hour; 6500sheets/hour; 6200sheets/hour
|Model||Ecoo HIS-1100||Ecoo HIS-1280||Ecoo HIS-1450|
|Coating registration accuracy||±0.2mm||±0.2mm||±0.2mm|
|Power||50KW(E) 42KW(W)||54KW(E) 44KW(W)||57KW(E) 47KW(W)|
|Remark: Production speed depending on sheet weight, size and quality|
Producing And Packaging
Enlarged feeder with four sucking and six forwarding suckers and
air blowing for spool can feed sheet easily and smoothly.
2. Front Side Lay Gauge
When sheet reaches front lay gauge, left and right pulling lay
gauge can be used.
The machine can stop feeding immediately by sensor without sheet
and release pressure to keep bottom roller under no varnish
3. Varnish Supply
Steel roller and rubber roller with metering roller reversing and
doctor blade design control by varnish consumption and volume to
meet the demand of products and operate easily.
(Varnish consumption and volume are determined by LPI of ceramic
4. Transferring Unit
After sheet is transferred from pressure cylinder to gripper, air
volume blowing for paper can support and reverse sheet smoothly,
which can prevent sheet surface from being scratched.
5. Conveying Unit
Upper and lower conveying belt can form thin sheet to be curved for
6. Sheet Delivery
Automatic pneumatic patting sheet controlled by photoelectric
detecting sensor make sheet pile fall automatically and collect
Electronic control can take out sheet sample safely and quickly for
Producing And Packaging
Q: What about the Installation and after-sales technician support?
A: Our engineer can go to help the installation and provide the
necessary training. The buyer should take the round air plane
tickets and service charge and the local accommodation cost. Any
problems or questions, we will be at your disposal 7x24 hours.
Among our large amount of CTP installations worldwide, there are
also many end users (printers) who have purchased the CTP products
from EcooGraphix China directly and EcooGraphix technical service
team support these installations remotely with regular onsite
These end users Printers all run the CTP systems with full
satisfaction due to our robust quality, seamless remote service,
thorough training and maintanence. If you are a printer who is
considering purchasing directly from EcooGraphix China, there is no
hasle on installations, training and after sales service. We
guarantee your satisfaction.