Tankii Edit NiCrTi/45CT Spray Wire In Arc And Flame Spray System
Basic Info.
Product Description
NiCrTi Spray Wire Use in Arc and Flame Spray System 1.6mm 2.0mm
Product Overview:
NiCrTi/45CT thermal spray wire is a Nickel/Chrome/Titanium wire developed specifically for boiler applications. This second generation material replaces 06BXP and produces coatings which are extremely resistant to corrosive vanadium and sulfur gases in boiler atmospheres.
Typical Uses and Applications of tafa 45CT thermal spray wire:
This material has proven very effective in providing long term protection to boiler tubes against high temperature sulfidation. The wrought material is highly resistant to sulfur/vanadium atmospheres up to 1800°F. Wrought material of this type has shown a 2 mil per year corrosion rate over a nine year period when used in the super heater section of boilers. Coatings of 45CT wire applied to boiler tubes have shown virtually no loss of thickness or spalling after 24 months of service (as of this writing).
Chemical composition of tafa 45CT thermal spray wire:
Nominal composition |
Cr% |
Ni +Ti% |
Min |
45 |
/ |
Max |
/ |
Bal. |
Standard Sizes & Packing of thermal spray wire:
Diameter |
Packing |
Wire Weight |
1/16 (1.6mm) |
D 300 Spool |
15kg((33 lb)/spool |
Other sizes can produced based on customers' requirement.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.