HW-CMM Connector, HW-221C20F24H,MTL-55302F,2mm Pitch.
HW-221C20F24H:
The CMM has been developed for the aerospace,avionics,instrumentation & control,defence and transportation markets,with applications that induce IFES,HUDs,fight controls,FADEC units,radars,missiles, electro-optical sighting systems,satellites,mobile radios,power supplies,UAVs and engine controls.It is also used engine controls.It is also used in a growing number of medical,and telecom applications,NICOMATICs pecializes in the design,development and manufacture of electronic connectors.
Part numbering:
| Type | L |
| S | 24-28 |
| C | 22 |
FIXING HARDWARE FOR CMM 220 FEMALE
| REFERENC | ASSEMBLY ON PCB | OVERALL DIMENSIONS | RECOMMENDATION |
|
F22H |
|
|
F22 :CMM male : Y-T-S-C (D-E :straight) F22H :CMM male : Y-T (D :straight) |
MALE STRAIGHT ON CABLE P/N 30-33xx (solder or crimp):
| Loaded | Unloaded | Ampere | Cable A | ØB | ØC | Length D hole | Length E body | Length F conductor | Solder | Crimp by HX3 Hexagone size/Dies | Crimp by AF8 | ||||
| AWG 20 | AWG 18 | AWG 16 | AWG 14 | AWG 12 | |||||||||||
| 3305 | 30-3305 | 5A | × | 1,1mm |
1,65 |
6,2mm | 6,7mm | 4,5mm | OK | Hex.1,9 mm/C14923 | OK | ||||
| 3308 | 30-3308 | 8A | × | 1,35mm |
1,85 |
6,2mm | 6,7mm | 4,5mm | OK | Hex.1,9 mm/C14923 | OK | ||||
| 3310 | 30-3310 | 10A | × | × | × | 1,7mm | 6,2mm | 6,7mm | 6mm | OK | OK | ||||
| 3315 | 30-3315 | 15A | × | 2mm | 6,2mm | 6,7mm | 6mm | OK | OK | ||||||
| 3320 | 30-3320 | 20A | × | 2,6mm | 6,2mm | 6,7mm | 5,3mm | OK | OK | ||||||
Materials and coating:
| Materials and coating | |
| Insulating medium |
Glass fiber reinforced PPS, UL94-V0 Radiation resistant, non hygroscopic, ozone resistant |
| Contact | Copper alloy nickel base plating |
| Enclosure | stainless steel |
| Electrical performance index | |
| Voltage withstand test (sea level) | 800V AC/DC |
| Insulation resistance | ≥1000MΩ |
| Rated current |
LF contact: working current 25 C, ≤ 3A; Working current 85 C, ≤ 2.2A; contact resistance ≤10mΩ |
| Mechanical performance index | |
| Mechanical life | 500 times of plugging and unplugging |
| Environmental performance index | |
| Operating ambient temperature | -60℃ to 260℃ |
1. The contacts are distributed, and it is recommended to crimp the AWG22 wire for LF contacts;
2. After LF contact is pressed into the base with special tools, it is recommended to use the heat shrinkable sleeve
shrinks
its tail and fills the base cavity with glue;
Product details:
Materials and coating:
| Materials and coating | |
| Insulation medium | Glass fiber reinforced PPS,UL94-VO Radiation resistant,non hygroscopic,ozone resistant |
| Contact | LF contact copper alloy nickel base plating gold 0.8μ |
| Epiphy | Stainless steel |
| Electrical performance index | |
| Voltage withstand test(sea level) | 600V AC/DC |
| Insulation resitance | ≥100mΩ |
| Contact | Signal contact:working current 25*C,≤3A,working current 85C,≤2.2A,contact resistance≤10mΩ |
| Mechanical performance index | |
| Mechanical life | 500 times of plugging and unolugging |
| Single core insertion and extraction force of contact | LF contact:insertion force≤2N,pull-out force≥0.2N |
| Retention Force in contact bace | ≥10N |
| Environmental performance index | |
| Operating ambient temperature | 60℃-260℃ |
| Vibrating level | 0.75mm, 10G (root mean square) random vibration superimposed with sinusoidal vibration, 6 hours, instant break less than 2 nanoseconds |
| lmpact grade | 100G, 6 ms |
| Salt resistance | HcFc 141 bMGX (ATOCHEM) solvent |
| Salt spray test | 96h |
|
Moisture resistance |
56 days, 90% humidity |
Product display:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.