Class I+II Iimp 12.5ka Spd Lightning Arrester 1p Surge Protection Low Voltage
Class I+II Iimp 12.5kA SPD Lightning Arrester 1P Surge Arrester BRITEC BR-12.5M
| BR-12.5M-275 1P | |
| SPD classification according to EN 61643-11 | Type 1 + Type 2 |
| SPD classification according to IEC 61643-11 | Class I + Class II |
| Max. continuous operating a.c. voltage Uc | 275V |
|
Lightning impluse current (10/350us) Iimp |
12.5kA |
| Nominal discharge current (8/20us) In | 25kA |
| Max. discharge current (8/20us) Imax | 60kA |
| Voltage protection level Up | ≤1.3kV |
| Max. backup fuse | 125A gG |
| Response time tA | ≤25ns |
| Operating temperature range Tu | -40℃—80℃ |
| Operating state / fault indication | green / red |
| Cross-section area (Min.) | 4mm2 |
| Cross-section area (Max.) | 35mm2 |
| For mounting on | 35mm Din rail |
| Enclosure material | Thermoplastic UL94-V0 |
| Degree of protection | IP20 |
Dimension:
Q1: Are you a manufacturer or distributor?
A: We are a manufacturer in this field for more than 22 years.
Q2: Is that OK to print my LOGO?
A: Yes. We have our own brand "Britec", while we could also accept OEM, ODM or customized LOGO print and package.
Q3: How to deal with the faulty?
A: The defective rate of our product will be less than 0.2%. For defectiveproducts, we will repair them and resend them to you or we can discussthe solution.
Q4: How does your factory do regarding quality control?
A: We have professional QC department, we inspect all steps from raw ma-terials to the finished products according to our standard test. We alwaysattach great importance to the whole production process.
Q5: When will you ship my order?
A: Normally 3 weeks after receiving your pre-payment, but it can be negotiable according to our production schedule.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.