G 1 / 4 Metal Protective EMC Cable Gland , Industrial Watertight Cable Gland
G 1 / 4 Metal Protective EMC Type Industrial Watertight Cable Gland with EMC Spring
Product characteristics
1. The use of tetrafluoro gaskets can reduce friction between rubber and metal surfaces and improve service life.
2. Spring shielding layer is adopted, the contact surface of bottle blank is large and the installation efficiency is high.
3. The inner rubber is made of silica gel, which can meet the normal work of the product in extremely cold weather.
4. The product realizes the contact sealing between clamping ring and cable surface, which has little damage to cable and can effectively prevent the internal of motor or controller.
Product composition
Compression nut, inner core, main body, O-ring, nut, etc. Nut, body and nut made from nickel plated brass. The clamping parts are made of nylon plastic PA66 and UL94-V2. Sealing rings and O-rings are made of NBR and silicone rubber.
Performance and authentication
- Waterproof IP68
- CE,RoHS,REACH
| Item | Range Φ mm |
Tread Length GL mm |
Joint Length mm |
Spanner size mm |
Code | |||
| M | PG | G | NPT | |||||
| M12×1.5 | PG7 | G1/4 | NPT1/4 | 3-6.5 | 6.5 | 21 | 14 | HX-EMC- “Item”-T |
| 4-8 | 8 | 21 | 17/14 | |||||
| M16×1.5 | PG9 | 3-6 | 8 | 25 | 18 | |||
| 4-8 | 8 | 25 | 18 | |||||
| 5-10 | 8 | 25 | 20/18 | |||||
| M18×1.5 | PG11 | G3/8 | NPT3/8 | 5-10 | 8 | 25 | 20 | |
| M20×1.5 | PG13.5 | G1/2 | NPT1/2 | 6-12 | 8 | 29 | 22 | |
| 10-14 | 8 | 29 | 24/22 | |||||
| M22×1.5 | PG16 | 10-14 | 8 | 29 | 24 | |||
| M25×1.5 | G3/4 | NPT3/4 | 10-14 | 9 | 30 | 24/27 | ||
| PG21 | 12-16 | 9 | 30 | 27 | ||||
| 13-18 | 9 | 30 | 30/27 | |||||
| M32×1.5 | 15-22 | 10 | 32 | 35 | ||||
| PG29 | G1 | NPT1 | 18-25 | 10 | 32 | 40/35 | ||
| M40×1.5 | 18-25 | 11 | 35 | 40/45 | ||||
| 22-30 | 11 | 35 | 45 | |||||
| PG36 | G1-1/4 | NPT1-1/4 | 25-33 | 11 | 35 | 50/45 | ||
| M50×1.5 | PG42 | G1-1/2 | NPT1-1/2 | 32-38 | 13 | 39 | 57/55 | |
| M63×1.5 | PG48 | G2 | NPT2 | 37-44 | 14 | 40 | 64/68 | |
| 42-52 | 14 | 40 | 78/68 | |||||
Usage method
- Metal cable waterproof gland is the accessory of cable. The products are widely used in oil, chemical, machinery, nuclear power, shipbuilding, paper, pharmaceutical, food, aerospace and other fields.
- The gland can lock the cable, and the other end can be connected to the upper part of the equipment box, or screw thread can also be selected.
- Access to the import and export of the internal thread on the electric equipment. General mechanical control box, distribution plate, machine.
- Wire and cable fixed, can effectively clamp the cable and achieve the purpose of waterproofing.
- The main function is to make the line unobstructed, to keep the cable sealed, and to ensure the insulation level of the cable gland to ensure its safe and reliable operation. If the sealing is bad, not only will the oil leakage cause the drying of the oil impregnated paper, but also the moisture will intrude into the cable, causing the insulation performance of the paper to decrease.
Product Introduction
Our cable gland has a wide range of uses, which can be used to connect the LED lamp line interface, the laying of the circuit cable, the connection of the electric box cable; it can also be used in the cable connection of the manufacturing industry equipment, the line connection of the robot industry, the connection of the charging pile line, and the application in the new industries such as wind energy and solar energy. The cable connector has corrosion resistance and can be applied to marine operations, chemical equipment and so on.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.