RX10 Grade Tungsten Carbide Flats / Wear Resistance Carbide Insert Blanks
RX10 Grade Tungsten Carbide Flats / Wear Resistance Carbide Insert Blanks
Introduction of tungsten carbide:
Tungsten carbide is a hard material composed of a metal matrix composite where carbide particles act as the aggregate and a metallic binder serves as the matrix. It is one of the most successful composite engineering materials ever produced. Its unique combination of strength, hardness and toughness satisfies the most demanding applications.
Tungsten carbide is used in machining tough materials such as cast iron or steel, as well as in situations where other tools would wear away, such as mining tools and wear parts. Most of the time, carbide will leave a better finish on the part,and allow faster machining. Carbide tools can also withstand higher temperatures than standard high speed steel tools.
RX10 High hardness, suitable for roughing of iron, solid wood, dry wood or nonferrous metal, ceramic and other alloys.
RX20 High toughness, easy to be brazed without heat preservation. Suitable for rosewood, solid wood, pinewood, and other wood with a lot stammer.
RX10T High hardness, suitable for finishing of iron, nonferrous metal, ceramic and other alloying, semifinishing of of hardwood, chipboard, MDF and HDF. Better to use silver soldering.
AB10 High toughness, difficult to break tooth. Special used for finger jointing tool.
| THICKNESS | WIDTH | LENGTH | |||
| Size | Tolerance | Size | Tolerance | Size | Tolerance |
| 1~3 | 0~+0.3 | 4~6 | 0~+0.2 | 5~30 | 0~+0.5 |
| 3~5 | 0~+0.4 | 6~10 | 0~+0.3 | 30~60 | 0~+1 |
| 5~8 | 0~+0.5 | 10~15 | 0~+0.4 | 60~100 | 0~+1.5 |
| 8~12 | 0~+0.8 | 15~20 | 0~+0.5 | 100-150 | 0~+2 |
| 12~15 | 0~+1 | 20~25 | 0~+0.8 | 150~200 | 0~+2.5 |
| >15 | 0~+1.2 | 25~30 | 0~+1 | 200~250 | 0~+3 |
| 30~40 | 0~+1.5 | 250~300 | 0~+4 | ||
| 40~50 | 0~+2 | 300~350 | 0~+5 | ||
| 50~80 | 0~+3 | 350~450 | 0~+8 | ||
| >80 | 0~+5 | >450 | 0~+10 | ||
| 1,The deformation amount of the plane of ordinary specifications is no more than 0.3mm, and that of the side is no more than 0.5mm | |||||
| 2,Thickness <2MM, width BBB 0 20MM, lateral deformation less than or equal to 1MM | |||||
| TPYE | SPECIFICATION | ||
| T(mm) | W(mm) | L(mm) | |
| STB424 | 3.2 | 19.1 | 152.4 |
| STB428 | 3.2 | 22.2 | 152.4 |
| STB432 | 3.2 | 25.4 | 152.4 |
| STB436 | 3.2 | 28.7 | 152.4 |
| STB440 | 3.2 | 31.8 | 152.4 |
| STB448 | 3.2 | 38.1 | 152.4 |
| STB46 | 3.2 | 4.8 | 152.4 |
| STB48A | 3.2 | 6.4 | 25.4 |
| STB48B | 3.2 | 6.4 | 31.8 |
| STB48C | 3.2 | 6.4 | 57.2 |
| STB48D | 3.2 | 6.4 | 76.2 |
| STB48E | 3.2 | 6.4 | 152.4 |
| STB510 | 4.0 | 7.9 | 152.4 |
| STB512 | 4.0 | 9.5 | 152.4 |
| STB516 | 4.0 | 12.7 | 152.4 |
| STB520 | 4.0 | 15.9 | 152.4 |
| STB524 | 4.0 | 19.1 | 152.4 |
| STB528 | 4.0 | 22.2 | 152.4 |
| STB532 | 4.0 | 25.4 | 152.4 |
| STB536 | 4.0 | 28.7 | 152.4 |
| STB540 | 4.0 | 31.8 | 152.4 |
| STB610 | 4.8 | 7.9 | 152.4 |
| STB610A | 4.8 | 7.9 | 76.2 |
| STB612 | 4.8 | 9.5 | 152.4 |
| STB612A | 4.8 | 9.5 | 76.2 |
| STB616 | 4.8 | 12.7 | 152.4 |
| STB616A | 4.8 | 12.7 | 76.2 |
| STB620 | 4.8 | 15.9 | 152.4 |
| STB620A | 4.8 | 15.9 | 76.2 |
| STB624 | 4.8 | 19.1 | 152.4 |
| STB628 | 4.8 | 22.2 | 152.4 |
| STB632 | 4.8 | 25.4 | 152.4 |
| STB636 | 4.8 | 28.7 | 152.4 |
| STB640 | 4.8 | 31.8 | 152.4 |
| STB648 | 4.8 | 38.1 | 152.4 |
| STB68 | 4.8 | 6.4 | 152.4 |
| STB68A | 4.8 | 6.4 | 76.2 |
| STB812 | 6.4 | 9.5 | 152.4 |
| STB812A | 6.4 | 9.5 | 76.2 |
| STB816 | 6.4 | 12.7 | 152.4 |
| STB816A | 6.4 | 12.7 | 76.2 |
| STB820 | 6.4 | 15.9 | 152.4 |
| STB820A | 6.4 | 15.9 | 76.2 |
| STB824 | 6.4 | 19.1 | 152.4 |
| STB824A | 6.4 | 19.1 | 76.2 |
| STB828 | 6.4 | 22.2 | 152.4 |
| STB832 | 6.4 | 25.4 | 152.4 |
| STB836 | 6.4 | 28.7 | 152.4 |
| STB840 | 6.4 | 31.8 | 152.4 |
| STB848 | 6.4 | 38.1 | 152.4 |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.