Wastewater Drainage Submersible Sewage Pump Station With 5m - 200m Head

Sewage pump station details:

Integrated prefabricated pumping station are used to move wastewater to higher elevations in order allow transport by gravity flow. Sewage is fed into and stored in a sealed underground pit, commonly known as a wet well. When the level rises to a predetermined point, a pump will be started to lift the sewage upward through a pressurized pipe system from where it is discharged into a gravity manhole again. From here the cycle starts all over again until the sewage reaches its point of destination – usually a treatment plant.

Sewage pump station working principle:

Sewage is fed into and stored in a sealed underground pit, commonly known as a wet well. When the level rises to a predetermined point, a pump will be started to lift the sewage upward through a pressurized pipe system from where it is discharged into a gravity manhole again.

Sewage pump station applications:

1. Villas, residential areas, urban middle areas, hilly and mountainous areas, industrial parks, new rural construction, groundwater rich areas and facilities such as stations, airports, schools and restaurants;

2. Library, sports sound and club training ground;

3. Sewage collection and transport in the green areas and wetland reserve areas;

4. Sewage collection and treatment of agriculture and forestry animal husbandry factory;

5. Riot area of chemical plant;

6. Rainwater collection;

7. Upgrade the pump station, etc.

The integrated pump station is mainly installed in the outdoor underground and can also be used in indoor situations