FTTH Indoor 2.0mm PVC Single Mode SC UPC Fiber Optic Jumpers
FTTH Indoor 2.0mm PVC Single Mode SC UPC Fiber Optic Jumpers
1.Fiber Patch Cord Basic Introduction:
SC connectors on both ends, these SM jumpers are available in duplex configurations and utilize ceramic ferrules for precision and durability.
Geehe specifically controlled end-face geometry provides optimal physical contact by incorporating pre-polished and pre-radiused ferrules into the patch cords connectors. These features help ensure radius, apex offset and concentricity are tuned for greater mating reliability and optical insertion loss & return loss performance.
Fiber optic patch cables to connect network equipment in the data center, telecom room, and at the desktop.
2.Fiber Optic Patch Cord SC To SC
- Pre-terminated with LC or SC connectors.
- High speed and legacy networks
- Ideal for fitment in confined locations within rack or cabinet
- Low insertion loss &High return loss
- Hight realiability&stability
- Precision ferrule end-face geometry
- Available in hybrid connector constructions
- 90º boots provide protection and ensure correct bend radius
- RoHS compliant - Riser, Plenum, and LSZH rated cables available
- Good protection with dust cap
3.SC To SC Patch Cord Application:
- CATV
- Active device termination
- Telecommunication networks
- Metro and Local Area Networks(LANs)
- Data Processing networks
- Premise installation
4.Specification&Technology Parameters
| Parameters | Value | ||||
| Connector Type | LC/UPC,LC/UPC | ||||
| Center Wavelength(nm) | 1310 or 1550 | ||||
| Max.Insertion Loss(dB) | 0.3 | ||||
| Min.Extinction Ratio(dB) | 23 | ||||
| Min.Return Loss(UPC) (dB) | 50 | ||||
| Min.Return Loss(APC) (dB) | 60 | ||||
| Key Orientation | Slow Axis | ||||
| Axis Alignment(deg) | ±3 | ||||
| Operating Temperature(℃) | -20~+70 | ||||
| Storage Temperature(℃) | -40~+85 | ||||
| FIber Type | PM Panda Fiber | ||||
* For Device with connector.IL is 0.3dB higher,RL is 5dB lower,ER is 2dB lower.
* The default connector key is aligned to the slow axis.
5. Fiber patch cord SC Specification& Technology Parameter:
| Parameter | Unit | Index | |||
| End-Face Type | PC | UPC | APC | ||
| IL | dB | SM: ≤0.3；MM ≤0.1 | |||
| Repeatability | dB | ≤0.1 | |||
| interchangeability | dB | ≤0.2 | |||
| RL | SM | dB | ≥50 | ≥50 | ≥50 |
| MM | dB | ≥36(Without APC connector) | |||
| Mating Times | ＞1000 | ||||
| Operating Temperature | ℃ | -40~ +80 | |||
* EX:OFC-D-LA-LA-09-1-1.0
6. Ordering Information:
| OFC | -X | -XX | -XX | -XX | -X | -X |
| S: Simplex D: Duplex |
SA:LC/APC SC:LC/UPC SP:LC/PC | SA:LC/APC SC:LC:UPC SP:LC/PC | 09:0.9mm 20:2.0mm 30:3.0mm | 0:G652D 1:G657A 2:50/125 3:62.5/125 4:others | 0.5:0.5m 1.0:1.5m 10:10.0m |
|
| Fiber Mode | Connector Type | Connector Type | Cable Diameter | Flange Type | Fiber Length |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.