IP67 Rated KF-51 Silicon Cable PTC Temperature Sensor KTY81-121 1.5m -40~+150C

For temperature measurement of liquid media by installing in immersion sleeves (TH / NTH). For measuring the temperature of airand non-aggressive gases in the air duct by installing it in a protective coil (SW-200).

Sensor sleeve material: V4A (1.4571)Permissible atmospheric humidity: max. 95% rel. humidity, non-condensingMax. measurement current: < 1 mAElectrical connection: only to safety extra low voltage, max. 30 VAC / 42 VDC, KF-100-4 and KF-100 / 6-4 4-wireSensor wire extendable up to: depending on the cross-section of the conductor and the sensor unit typeTolerances: PT100/PT1000 Class BMounting / attachment: in immersion sleeve, protection coil, on pipe etc.Protection rating: IP 67Protection class: IIIAccessories: Immersion sleeves / protection coils

Alre temperature display and control devices

SENSOR TYPE FEATURES

„Sensor 0“ (NTC 2 K 25) KF-0 Wire PE, 1,5 m, – 35…+ 100 °C

„Sensor 1“ (NTC 1K) KF-1 Wire PE, 1,5 m, – 35…+ 100 °C

„Sensor 2“ (NTC 47 K) KF-2 Wire PE, 1,5 m, – 35…+ 100 °C

„Sensor 3“ (NTC 8 K) KF-3 Wire PE, 1,5 m, – 35…+ 100 °C

„Sensor 4“ (NTC 10 K) KF-4 Wire PE, 1,5 m, – 35…+ 100 °C

„Sensor 4“ (NTC 10 K) KF-4 / 6 Wire PE, 6 m, – 35…+ 100 °C

„Sensor 5“ (NTC 50 K) KF-5 Wire PE, 1,5 m, – 35…+ 100 °C

„Sensor 6“ (NTC 100 K) KF-6 Wire PE, 1,5 m, – 35…+ 100 °C

„Sensor 51“ (KTY 81-121) KF-51 Wire silicone, 1,5 m, – 50…+ 150 °C

„Sensor 51“ (KTY 81-121) KF-51 / 6 Wire silicone, 6 m, – 50…+ 150 °C

„Sensor 57“ (KTY 11-7) KF-57 Wire PE, 1,5 m, – 35…+ 100 °C

PT-100 KF-100-4 Wire silicone, 1,5 m, – 50…+ 180 °C

PT-100 KF-100 / 6-4 Wire silicone on, 6 m, – 50…+ 180 °C

PT-1000 KF-1000 Wire silicone, 1,5 m, – 50…+ 180 °C