Pharmaceutical UL Cleanroom HEPA Filter Mini Pleated Gel Seal Media
UL Certificated H14-U17 Mini Pleated Gel Seal HEPAULPA Media Air Filter Manufacturers For Pharmaceutical Cleanroom
Hepa Filter Description:
All heating and cooling air duct systems naturally collect dust and contaminants. Clean rooms, such as those used in the electronics, pharmaceutical, and medical industries, require a controlled environment free of dust, airborne particles, and other contaminants. Ultra low particulate air (ULPA) filters and high efficiency particulate air (HEPA) filters are used in commercial air filtration systems to trap extremely small particulate contaminants.
Hepa Filter Material Instructions:
Structure: L-type side gel seal, Y-type top gel seal.
Media: Ultra-fine fiberglass filter paper.
Frame: Anodized aluminum alloy.
Separator: Hot-melt glue.
Sealant: Polyurethane.
Temperature: Maximum 90°C in continuous service.
Hepa Filter Application
Suitable for electronics, pharmaceutical industry, clean room, HEPA diffuser, laminar flow devices and the occasions require ultra-high cleanliness.
Hepa Filter Common Specifications
| Model | Actual size W×H×D(mm) |
Air flow (m³/h) |
Initial pressure drop(Pa) |
Final pressure drop(Pa) |
| H4BX1-70L5-WB1 | 484×484×70 | 630 | 249Pa Face velocity 0.85m/sec |
500Pa *Proposed value |
| H4PT2-70L5-WB1 | 630×630×70 | 1100 | ||
| H4BX3-70L5-WB1 | 570×1170×70 | 1000 | 110Pa Face velocity 0.45m/sec |
220Pa *Proposed value |
| H4PT4-70L5-WB1 | 1170×1170×70 | 2100 | ||
| H4BX1-90L5-WB2 | 484×484×90 | 630 | 220Pa Face velocity 0.85m/sec |
440Pa *Proposed value |
| H4PT2-90L5-WB2 | 630×630×90 | 1100 | ||
| H4BX3-90L5-WB2 | 570×1170×90 | 1000 | 98Pa Face velocity 0.45m/sec |
200Pa *Based on FFU performance |
| H4PT4-90L5-WB2 | 1170×1170×90 | 2100 |
FAQ:
1. Q: Are you manufacturer or trader?Where are your factory located?
A: We are manufacturer with professional designers and engineers. Our factory is located in Guangzhou city.
2. Q: How long is your warranty? Can we extend?
A: 12 months after installation and commissioning. Warranty can be extended with extra charge.
A: Yes, we have engineer team for ODM and OEM services
4. Q: What documents will you provide?
A: Usually we will provide DQ, IQ, PQ, OQ, FAT, SAT, operation manual, maintenance instruction, layout drawing etc.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.