55% PPGL Coil RAL DX53D Color Colour Coated Coil Punching
Decoration PPGL Coil 55% Al-Zn Alloy Coated Steel SMP Color Coated Steel Sheet
Description
PPGL sheet in coil is a kind of steel Coil with PE, HDP, PVDF, and other coatings. It has good processing and forming,
good corrosion resistance, and the original strength characteristics of the steel plate.This is the PPGL steel coil Profile:
Top(Finish) Coating
Primer Coating
Chromate Coating
Zinc Coating
Base Metal(Cold Rolled Steel Sheet)
Zinc Coating
Chromate Coating
Epoxy, Polyester
The substrate is an annealed cold-rolled steel coil.
Chromated paint is used for cleaning the surface of the cold-rolled coil.
After Chromated, the next is zinc coated. The coil becomes a galvalume steel coil now.
After zinc coated, the next is Chromated again, for cleaning the galvalume steel coil surface again.
The primer coating is used for increasing the adhesion of the top coating. When cold roll forms, the paint will not fall off.
The top paint coating metal is PE or PVD
size:
| Grade | CGCC,CGCH,G550,DX51D,DX52D,DX53D |
| Thickness | 0.12-4.0mm |
| Width | 600-1500mm |
| Length | 1000-12000mm |
| Zinc Coating | Z40-600 g/m2 |
| Coating Thickness | Top-15-35, Back 5-15 |
| Color | RAL Color |
| Surface |
Matt,High gloss,Color with two sides,Wrinkle, Wooden color,Marble |
| Coil Weight | 2-5tons |
| Grade | C≤ | Mn | P≤ | S≤ | Si≥ | Cr≤ | Cu≤ | Mo≤ | Ni≤ | V≤ |
| A | 0.25 | 0.27-0.93 | 0.035 | 0.035 | 0.10 | 0.40 | 0.40 | 0.15 | 0.40 | 0.08 |
| B | 0.30 | 0.29-1.06 | 0.035 | 0.035 | 0.10 | 0.40 | 0.40 | 0.15 | 0.40 | 0.08 |
| C | 0.35 | 0.29-1.06 | 0.035 | 0.035 | 0.10 | 0.40 | 0.40 | 0.15 | 0.40 | 0.08 |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.