Hot Rolled Cold Rolled Aluminum Sheet Plate Alloy 1050 1060 5005 Material
Aluminum Alloy Sheet Plate 1050 1060 5005 5050 5052 5083 5086 Alumina Sheet Plate
| ALLOY | THICKNESS | WIDTH | LENGTH | TEMPER |
|
A1050,A1060, A1070,A1100 |
0.15MM~600MM | 10MM~2500MM | 20MM-16000MM | O,H12,H22,H14,H16,H18, H24,H26,etc |
|
A3003,A3105 ,A3004 |
0.15MM~600MM | 10MM~2500MM | 20MM-16000MM | O,H14,H18,H24,etc |
|
A5052 ,A5005, A5083,A5754 |
0.15MM~600MM | 10MM~2500MM | 20MM-16000MM | O,H18,H24,H32,H34,H111,H112 ,etc |
|
A6061,A6082
,A6063 |
0.15MM~600MM | 10MM~2500MM | 20MM-16000MM | T4,T6, T651,etc |
| A8011 | 0.15MM~600MM | 10MM~2500MM | 20MM-16000MM |
O,H12,H22,H14,H16,H18, H24,H26, etc |
| Process | Hot rolled or Cold rolled | |||
| Package | Export wooden pallents, craft paper, anti-blushing agent | |||
| Standard | GB/T 24001-2016, GB/T 19001-2016, ASTM, JIS, EN | |||
| Certificates | ISO9001,SGS, ROHS,DNV,TUV,ISO14001,ABS,CCS,CE,Kosher | |||
| Quality of material: |
Totally free from defects like white rust, oil patches, roll marks, edge damage, camber, dents, holes, break lines, scratches and free from coil set |
|||
| Application |
Mainly used insigns, billboards, building exterior decoration, bus body, high-rise buildings and factories wall decoration, kitchen sink, lamp, fan leaves, with pieces of electronic, chemical equipment, sheet metal processing parts, deep drawing or spinning hollowware, welding parts, heat exchangers, bell surface and disk, plate, kitchenware, decorations, reflective devices, ect |
|||
| MOQ | 5 TONS (We can accept 500kg or less if we have the same specification in stock.) | |||
| Delivery Time | Future Goods: 25-35 days, Ready stock: 7-10days | |||
| Payment Terms |
30% T/T in advance as deposit,70% balance against the B/L copy； or 100% irrevocable L/C at sight |
|||
| Our Service | We can provide you with free samples and various custom services ! | |||
| Alloy |
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Zn |
Ti |
Al |
| 1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | _ | 0.05 | 0.03 | ≥99.5 |
| 1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | _ | 0.05 | 0.03 | ≥99.6 |
| 1100 | Si+Fe:0.95 | 0.05~0.40 | 0.05 | _ | _ | 0.1 | _ | ≥99 | |
|
1200 |
Si+Fe:1.00 |
0.05 |
0.05 |
_ |
0.1 |
0.05 |
≥99 |
||
| 3003 | 0.6 | 0.7 | 0.05~0.20 | 1.0~1.5 | _ | _ | 0.1 | _ | Remainder |
| 3105 | 0.6 | 0.7 | 0.3 | 0.30~0.8 | 0.20~0.8 | 0.2 | 0.4 | 0.1 | Remainder |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.