JT6300 Mould Cleaning Agent for Electric Insulator APG Process - 15 mPa.s Viscosity, 65℃ Flash Point
Specialized cleaning liquid for high-voltage power APG equipment and mixer pouring systems. For industrial use only.
| Parameter | Unit | Value |
|---|---|---|
| Color & Appearance | -- | Transparent liquid |
| Viscosity | mPa.s | 15 |
| Flash Point | ℃ | 65 |
| Spread Rate | ㎡ | 20-25 |
| Density | g/mm³ | 0.90-0.92 |
Complementary release agent designed for optimal performance with electric insulator moulds.
- Excellent release performance for smooth demoulding
- High chemical stability and reliability
- Non-reactive with casting materials
- Non-corrosive to mould surfaces
- Environmentally friendly formulation
- Thoroughly clean mould cavity with solvent to remove grease and wax
- For new moulds: Apply 3-4 coats initially (spray again after solvent evaporation)
- For subsequent use: Apply single coat per mould or after 2-10 pours
- Apply via spraying or brushing until thin, uniform coating forms on mould surface
Packaging: 5KG pots, 20KG drums
Storage: Store in dry, ventilated environment at 18-40℃. Shelf life: 1 year.
Important: This product is highly flammable (Flash Point: 7℃ typical). Use proper grounding procedures to prevent static discharge. Wear appropriate personal protective equipment including chemical-resistant gloves and safety glasses.
Our team provides comprehensive process guidance and technical support. We have extensive experience serving thousands of manufacturers globally.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.