200G Ethernet Transceiver QSFP DD Module For ER4 40km SMF 12W Power Consumption
QSFP-DD 200G Ethernet Transceiver Module For ER4 40km SMF With FEC,12W Power Consumption
This product is a 200Gb/s transceiver module designed for 40km optical communication applications. The design is compliant to IEEE802.3bs 200GBASE-ER4 standard. The module converts 8 input channels(ch) of 25Gb/s electrical data to 4 channels of LWDM optical signals, and multiplexes them into a single channel for 200Gb/s (PAM4) optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 200Gb/s(PAM4) input into 4 LWDM channels of signals, and converts them to 8 channels output electrical data.
Key Features
- QSFP-DD MSA compliant
- 4 CWDM lanes MUX/DEMUX design
- Up to 40km transmission on single mode fiber (SMF) with FEC
- Operating case temperature: 0 to 70℃
- Maximum power consumption 12W
- Duplex LC connector
- RoHS compliant
Application
- 5G Network
- 200G Ethernet
- Enterprise networking
Product Details
| Parameter | Symbol | Min | Typical | Max | Units | No |
| Operating Case Temperature | TOP | 0 | 70 | degC | ||
| Link Distance | D | 0.002 | 30 | km | FEC required on host system to support maximum distance | |
| Link Distance | D | 0.002 | 40 | km | Built-in PFEC is required to support up to 40km | |
| Power Consumption | 12 | W | ||||
| Center Wavelength | L0 | 1294.53 | 1295.56 | 1296.59 | nm | |
| L1 | 1299.02 | 1300.05 | 1301.09 | nm | ||
| L2 | 1303.54 | 1304.58 | 1305.63 | nm | ||
| L3 | 1308.09 | 1309.14 | 1310.19 | nm | ||
| Average Launch Power,each Lane | PAVG | -0.1 | 5.6 | dBm | ||
| OMA, each Lane | POMA | 3.4 | 6.4 | dBm | ||
| Sensitivity, each lane | SEN1 | MAX(-11.1, SECQ-12.5) | dBm | For 30km | ||
| Sensitivity, each lane | SEN2 | MAX(-14.1, SECQ-15.5) | dBm | For 40km | ||
Innovations
The manufacturing environment is strictly compliant with most advanced technological standards, ensuring our products a long term reliability.
Quality & Assurance
Our Cutting-Edge test equipment verifies that each of our products meets our high-quality standards
Customization
Thanks to the specialists of our Engineering Department, we have full control over both the hardware and the software of all our transceivers. Need your personal labelling? No problem, just ask and we provide!
Multi-Compatibility
ColorOptic offers a true cost-effective solution for all major platforms including the original vendor firmware.
Technical Support
Any issues with your equipment? We are already dispatching an engineer to your premises to fix it. We are 7x24 hours online supports.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.