DO-214AA Thyristor Surge Protection Devices 100A 275V SMD P3100SB 4KV
SOCAY P3100SB 4KV DO-214AA P3100SB Thyristor Surge Protection Devices 100A 275V SMD
DATASHEET: PXXX0SB_v2103.1.pdf
1.Selection Method
1,To know the customer's product, operating voltage, application port, protection level.
2,Break-state voltage > DC working voltage on the circuit.
3,Select the capacitance value and flow rate of the device according to the application port and protection level.
| Part Number | Marking | VDRM @IDRM=5μA |
VS ① @100V/μS |
VT @IT=2.2A | IS | IT | IH |
C0 ② @1MHz, 2V bias |
| V min | V max | V max | mA max | A max | mA min | pF typ | ||
| P0080SB | P008B | 6 | 25 | 4 | 800 | 2.2 | 50 | 80 |
| P0300SB | P03B | 25 | 40 | 4 | 800 | 2.2 | 50 | 80 |
| P0640SB | P06B | 58 | 77 | 4 | 800 | 2.2 | 150 | 80 |
| P0720SB | P07B | 65 | 88 | 4 | 800 | 2.2 | 150 | 75 |
| P0900SB | P09B | 75 | 98 | 4 | 800 | 2.2 | 150 | 70 |
| P1100SB | P11B | 90 | 130 | 4 | 800 | 2.2 | 150 | 70 |
| P1300SB | P13B | 120 | 160 | 4 | 800 | 2.2 | 150 | 65 |
| P1500SB | P15B | 140 | 180 | 4 | 800 | 2.2 | 150 | 65 |
| P1800SB | P18B | 170 | 220 | 4 | 800 | 2.2 | 150 | 65 |
| P2300SB | P23B | 190 | 260 | 4 | 800 | 2.2 | 150 | 60 |
| P2600SB | P26B | 220 | 300 | 4 | 800 | 2.2 | 150 | 60 |
| P3100SB | P31B | 275 | 350 | 4 | 800 | 2.2 | 150 | 50 |
| P3500SB | P35B | 320 | 400 | 4 | 800 | 2.2 | 150 | 50 |
| P4200SB | P42B | 400 | 520 | 4 | 800 | 2.2 | 150 | 40 |
|
Notes: ① Vs is measured at 100KV/s. ② Off-state capacitance is measured in VDC=2V, VRMS=1V, f=1MHz. |
||||||||
| Parameter | Definition |
| IS | Switching Current - maximum current required to switch to on state |
| IDRM | Leakage Current - maximum peak off-state current measured at VDRM |
| IH | Holding Current - minimum current required to maintain on state |
| IT | On-state Current - maximum rated continuous on-state current |
| VS | Switching Voltage - maximum voltage prior to switching to on stat |
| VDRM | Peak Off-state Voltage - maximum voltage that can be applied while maintaining off state |
| VT | On-state Voltage - maximum voltage measured at rated on-state current |
| C0 | Off-state Capacitance - typical capacitance measured in off state |
| Series | 2/10μS1 | 8/20μS1 | 10/160μS1 | 10/560μS1 | 10/1000μS1 | 5/310μS1 |
ITSM 50/60 Hz |
di/dt | |
| 2/10μS2 | 1.2/50μS2 | 10/160μS2 | 10/560μS2 | 10/1000μS2 | 10/700μS2 | ||||
| A min | A min | A min | A min | A min | A min | A min | Amps/µs max | ||
| B | 250 | 250 | 150 | 100 | 80 | 100 | 30 | 500 | |
|
Notes:
|
- Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product. - IPP ratings applicable over temperature range of -40ºC to +85ºC - The device must initially be in thermal equilibrium with -40°C < TJ < +150°C
|
||||||||
| High Temp Voltage Blocking | 80% Rated VDRM (VAC Peak ) +125°C or +150°C, Lead Material Copper Alloy High Temp Voltage Blocking 504 or 1008 hrs. MIL-STD-750 (Method 1040) JEDEC, JESD22-A-101 | |
| Temp Cycling | -65°C to +150°C, 15 min. dwell, 10 up to 100 cycles. MIL-STD-750 (Method 1051) EIA/JEDEC, JESD22-A104 | |
| Biased Temp & Humidity | 52 VDC (+85°C) 85%RH, 504 up to 1008 hrs. EIA/ JEDEC, JESD22-A-101 | |
| High Temp Storage | +150°C 1008 hrs. MIL-STD-750 (Method 1031) JEDEC, JESD22-A-101 | |
| Low Temp Storage | -65°C, 1008 hrs. | |
| Thermal Shock | 0°C to +100°C, 5 min. dwell, 10 sec. transfer, Thermal Shock 10 cycles. MIL-STD-750 (Method 1056) JEDEC, JESD22-A-106 | |
| Autoclave (Pressure Cooker Test) | +121°C, 100%RH, 2atm, 24 up to 168 hrs. EIA/Cooker Test) JEDEC, JESD22-A-102 | |
| Resistance to Solder Heat | +260°C, 30 secs. MIL-STD-750 (Method 2031 | |
| Moisture Sensitivity Level | 85%RH, +85°C, 168 hrs., 3 reflow cycles Level (+260°C Peak). JEDEC-J-STD-020, Level 1 |
| Lead Material | Copper Alloy | |
| Terminal Finish | 100% Matte-Tin Plated | |
| Body Material | UL recognized epoxy meeting flammability classification 94V-0 |
| Part Number | Component Package | Quantity | Packaging Option | Packaging Specification | |
| Pxxx0SB | DO-214AA | 2500 | Tape & Reel -12mm/13″tape | EIA -481 - D |
FAQ
Q1. Can I have a sample order ?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A:Sample needs 1 days, mass production time needs 1-2 weeks for order quantity more than
Q3. Do you have any MOQ ?
A: MOQ depend on the type of product, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
Q5. How to proceed an order ?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q6: Do you offer guarantee for the products?
A: Yes, we offer 2-5 years warranty to our products.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.