1 / 3 Phase EV Charging Cable Type 2 to Type 2 22kW 7KW Electric Car Charging Connector
EV Charging Cable Type 2 to Type 2 32A 22kW 7KW 1 Phase 3 Phase 5Meter Electric Car Charging Connector
With this EV Charging Cable Type 2 to Type 2 32A 3 Phase 5m, you can charge your EV/PHEV that has Type 2 port with an EV charging station that has Type 2 socket. The cable is 32 Amp, 3-phase, can charge your EV up to 22 kW. The product has a nice appearance, a hand-held ergonomic design and is easy to plug. The working length is 5 meters and is made from thermoplastic material. It has protection level IP55, is anti-flaming, pressure-resistant, abrasion-resistant and impact resistant.
How to use EV charging cable Type 2 to Type 2:
We recommend to use the following steps:
1. Plug in the EV charging cable Type 2 male end of the cable to the charging station
2. Plug in the Type 2 female end of the cable to the car’s charging socket
3. After the cable has clicked in place you are ready for the charge*
Safety notes:
- Always check the cable and the contacts for damage and contamination before using them.
- Never use a damaged product, vehicle inlet, or infrastructure socket outlet for charging.
- Never use contacts that are dirty or damp.
- Only connect the cable to vehicle inlets and infrastructure socket outlets that are protected against water, moisture and liquids.
- The charging process is finished when you actuate the locking lever of the vehicle connector. You can then disconnect the vehicle connector and the infrastructure plug. Never use force to disconnect them. Dangerous electric arcs could result in serious injury or death. Depending on the charging station and electric vehicle, the shutting down of the charging process and the duration of unlocking may vary.
- There are electric vehicles that can be started with the cable connected. Always make sure to disconnect it before driving away.
- In the unlikely event of smoke or melting, never touch the product. If possible, stop the charging process. Press the emergency stop switch on the charging station in any case.
- Make sure that the cable is out of reach of children. Only person’s with a valid driver’s license for motor vehicles can use it.
*Don’t forget to activate the charging station
When you finish with the charge, disconnect the vehicle side first and then the charging station side. Remove the cable from the charging station when not in use.
|
|
|
|
|
|---|---|---|---|
Fast & Reliable ChargingCharge your electric vehicle faster with our Type 2 to Type 2 32A (7.2kW) 5 Metre Charging Cable, allowing your vehicle to be ready when required for your electric journey! |
Hardwearing & DurableOur charging cables are ‘run-over’ proof, providing you with a long-lasting charging solution for your electric vehicle. The charging guns are also made from hard-wearing thermoplastic, ensuring maximum durability. |
Quality AssuredEach and every single one of our cables are checked in our manufacturing facilities to ensure that they meet the required quality for your charging experience. |
Included Cable Carry BagComplete with a Cable Carry Bag, you can take your electric vehicle charging cable anywhere you go, ensuring you're always prepared to charge your vehicle. |
|
|
||
|---|---|---|
| Type 2 type 2 Charging cable 5 meters black | Type 2 type 2 Charging cable 5 meters black | |
| Number of Phases | 3-Phase | 1-Phase |
| Max. current | 32A | 32A |
| Max. charging power | 22 KW | 7 KW |
| Colour | Black/white optional | Black/white optional |
| Operating temperature range | -30°C to 50°C | -30°C to 50°C |
| Weather protection IP65 | ✓ | ✓ |
| Cable specification | 5X6.0mm^2+1X0.5mm^2,TPU,black | 5X6.0mm^2+1X0.5mm^2,TPU,black |
| Cable length | 5m or customized | 5m or customized |
| Weight | 4 KG | 3.4 KG |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.









