Intelligent Control Guide Rod Electric Cylinders EG Series Strong Load Resistance

Price Negotiable

Price: 100-700

MOQ: 1

Delivery Time: 5-14

Brand: SXEGL

Product Description

Intelligent Control Guide Rod Electric Cylinders EG Series

High-Performance Linear Motion Equipment with Strong Load Resistance

The EG series guide rod electric cylinders combine ball screws and dual guide rods for precise positioning, exceptional lateral load resistance, and extended service life. These energy-efficient cylinders can replace traditional pneumatic and hydraulic systems, meeting demanding requirements in automotive manufacturing, 3C electronics, medical equipment, and renewable energy applications.

Core Advantages

High Rigidity & Load Resistance: Dual precision guide rods provide 5-10x stronger lateral load resistance than standard electric cylinders, with minimal displacement (0.02mm at 24kg load).
Micron-Level Precision: Ball screw transmission with encoder feedback achieves ±0.02mm repeat positioning (0.003mm with closed-loop control).
Modular Design: Multiple installation options (flange, trunnion, through-hole) with customizable stroke (25-840mm), speed (up to 1.48m/s), and IP40/IP65 protection.
Low Maintenance: Sealed dustproof design with lifetime lubrication extends maintenance cycles beyond 5,000km and 20,000 hours of operation.
Energy Efficient: 60% more efficient than pneumatic systems with intelligent control via EtherCAT/Modbus protocols and three operational modes (force, position, speed).

Application Scenarios

Automotive Manufacturing: ±0.01mm precision for engine block press-fitting and stable welding fixture operation.
3C Electronics: 0.005mm accuracy for camera lens placement (99.5% yield) and 1.2m/s speed for lithium battery processing.
Medical Equipment: 65dB noise level and 20m/s² acceleration for surgical robots and programmable rehabilitation devices.
Renewable Energy: Real-time solar panel adjustment (15-20% efficiency gain) and precise electrolyte injection (±1% error).

Technical Specifications

EG25 Model

Parameter	Value
Standard Motor Output	100W / Stepper 42
Rated Torque	0.32Nm / 0.25Nm
Screw Grade	C7 Rolling 1205/1210 (Slenderness ratio 1:52.5)
Repeatable Positioning Accuracy	±0.02mm
Max Thrust	170-340N (1210), 125-250N (1205)
Max Speed	50-500mm/s
Stroke	30/50/100mm
Max Load	20kg (Horizontal), 24kg (Vertical)
Max Radial Load	75kg
Piston Rod Rotation Angle	±0.7°
Weight (0mm stroke)	2.1kg
Weight Added per 10mm	0.2kg
Magnetic Switch Options	Contact reed (1m), NPN/PNP transistor (3m)

Complete Series Comparison

Model	EG16	EG20	EG25	EG32	EG40
Max Thrust (N)	88-220	88-400	125-340	150-1280	150-1280
Max Speed (mm/s)	40-100	40-250	50-500	100-500	100-500
Max Load (kg)	5	8	20/24	45/27	60/27
Radial Load (kg)	-	-	75	100	150