Micro USB connector model hanxia HX MICRO 4PCB0.8 ZB with gold plated contacts and nickel plated shell

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This document outlines the specifications for the HX MICRO 4PCB0.8 ZB, a Micro USB connector manufactured by Shenzhen Hanxia Electronic Co., Ltd. It details the material composition, mechanical, electrical, and environmental performance standards, along with testing methods and acceptance criteria.

Product Attributes

Brand: HX MICRO
Origin: Shenzhen, China
Manufacturer: Shenzhen Hanxia Electronic Co., Ltd
Model: HX MICRO 4PCB0.8 ZB
Connector Type: Micro USB

Technical Specifications

Section	Item	Specification	Test Method/Reference
Material Details	Plastic Part	LCP UL94V-0
	Contact Terminal Part	C5191, Nickel base, Gold plated contact area 1
	Shell Part	H65 EH, Nickel plated base 60
Working Conditions	Working Current	1.8Ampere
	Operating Temperature	-30+80
Mechanical Performance	Insertion Force	3.0kgf MAX	Refer to EIA 364-13A
	Extraction Force	0.7~1.8 kgf	Refer to EIA 364-13A
	Single Pin Retention Force	0.5 kgf MIN	Refer to EIA 364-13A
	Durability	5000 cycles	Uniform speed 600 cycles/hour, Refer to EIA 364-09A
Electrical Performance	Contact Resistance	50m MAX	Test with low power current, Refer to EIA 364-23A
	Insulation Resistance	100M MIN	Test between adjacent contact pins, Refer to EIA 364-21A
	Withstand Voltage	300V AC 1 minute 0.5mA MAX	Test plastic impedance between adjacent contact pins, Refer to EIA 364-20A
Environmental Performance	Solderability	Tinning area 95%	Product welding area immersed in 2355 tin bath for 50.5 seconds, Refer to MIL STD-202F
	High Temperature Resistance	Appearance no obvious damage, Contact resistance 100m, Insulation resistance 100M	Place product in 85 oven for 96 hours, then 3 hours at room temperature, Refer to MIL STD-1344A
	Low Temperature Resistance	Appearance no obvious damage, Contact resistance 100m, Insulation resistance 100M	Place product in -40 oven for 96 hours, then 3 hours at room temperature, Refer to MIL STD-1344A
	Humidity Resistance	Appearance no obvious damage, Contact resistance 100m, Insulation resistance 100M	Place product in 402, 9095RH environment for 120 hours, Refer to EIA 364-31A
	Corrosion Resistance	Appearance no obvious corrosion, Contact resistance 50m MAX	Place product in salt spray chamber with 5% salt water concentration, 352 for 12 hours spray, then 1 hour at room temperature, Refer to EIA 364-26A
	Solder Heat Resistance	Appearance no obvious discoloration/bubbling; Solder joints smooth	Product welding area immersed in 2355 tin bath for 50.5 seconds, Refer to MIL STD-202F
Vibration Test		Continuous test for 2 hours in X/Y/Z directions, frequency 10Hz to 55Hz and back to 10Hz per minute, Amplitude 1.5mm	Refer to EIA 364-28A