2.00mm Pitch Double Row PHB Connector Suitable for Electrical Equipment HCTL HC-PHB-2*5EY-05 Durable

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This specification document outlines the requirements for the 2.00MM PITCH PHB CONNECTOR DOUBLE ROW TYPE, part number HC-PHB - ****. It details the product's performance, testing methods, and inspection requirements, ensuring interchangeability with components of the same specification. Designed for electrical and electronic equipment, this connector is suitable for various environmental conditions and applications within specified wire gauge and PCB thickness ranges.

Product Attributes

Brand: (HCTLDZ)
Origin: China
Model: PHB (2.0) -05
Certifications: UL94V-O (for Housing Plastic and Plastic Wafer)
Color: Nature (for Housing Plastic and Plastic Wafer)

Technical Specifications

Item	Requirement	Test Mode
1. Scope
General Principles	Product performance, test methods and inspection requirements
2. Applicable Standards
Environmental Testing	GB/T2421, GB/T2423, GB/T2424
Basic Test Rules & Measurement Methods	GB/T5095
3. Use Condition
Ambient Temperature Range	-25 +85
Applicable Wire Sizes	AWG #2228
Applicable PC board thickness	1.6mm
4. Appearance and Dimension
Appearance	Product surface without defect, dirt, crack, and mechanical damage; contact parts without rust, plating oxidation, or peeling.
Dimension	According to drawings
Interchangeability	Exchangeable with same specification products.
5. Material
Terminal Contact	Brass, Thickness 0.50mm, Tin plating: 2.55 m
Housing Plastic	Nylon66 UL94V-O, Color: Nature
Plastic Wafer	Nylon66 UL94V-O, Color: Nature
Contact Pin	Brass, Thickness 0.50mm, Tin plating: 2.55 m
6. Electrical Performance
Rated Voltage	250V AC/DC
Rated Current	2A AC/DC
Withstand Voltage	No breakdown or flashover. Apply 800V AC(rms) for 1 minute between adjacent contacts and ground. Leakage current 0.5mA.	Apply 800V AC(rms) for 1 minute and the leakage current shall not exceed 0.5mA to the adjacent terminal and ground of the mate connectors
Contact Resistance	Initial value 20m. Apply 20mV and 100mA to mate connectors. Does not include wire resistance.	A maximum voltage of 20mV and maximum current of 100mA are applied to the mate connector
Insulation Resistance	1000 M. Apply 500V DC for 1 minute between adjacent contacts.	Apply 500V DC(rms) for 1 minute between adjacent contacts to measure the insulation resistance
7. Mechanical Performance
Terminal crimping Wire strength	AWG#22: 50N, AWG#24: 30N, AWG#26: 20N, AWG#28: 13N	Axial pullout force at 253mm/min
Fixed terminals And hole seat	12N	Housing together with terminal ends with wafer matched at 253mm/min inserting force test
Single contact insertion force	5N	Housing together with terminal ends with wafer matched at 253mm/min inserting force test
Seat pull-out force	15N	Exerts a force on the pin end at 253mm/min until the needle exits seat
Pin Retention Force	0.3N
Durability	Contact Resistance 40m. Appearance: No damage. Current Interruption: 1 sec Max.	Mate connectors up to 30 cycles at a maximum rate of 10 cycles/min prior to environmental test.
Vibration	Appearance: No damage. Contact Resistance 40m. No discontinuous current phenomenon.	Amplitude: 1.5mm p-p. Frequency: 10-55-10Hz/min. Direction: X, Y, Z axes. Period: 2 hours for each direction.
8. Environmental Characteristics
Thermal Aging	Appearance: No damage. Contact Resistance 40m.	Temperature: 852. Period: 96 hours continuously.
Temperature Rise	Measure conductor temperature rise when maximum rated current is passed.	Connector in combined state measure the temperature rise of contact when the maximum rated current is passed.
Humidity	Appearance: No damage. Contact Resistance 40m. Insulation Resistance 1000m.	Constant temperature and humidity test: Temperature: 402, Relative humidity: 90-95% RH. Period: 96 hours continuously.
Thermal Shock	Appearance: No damage. Contact Resistance 40m. Insulation Resistance 1000m. Withstand Voltage: No breakdown or flashover.	One cycle: -553 for 30min, room temp 10-15min; 853 for 30min, room temp 10-15min. Total cycles: 5.
Temperature Cycling	Same as paragraph 8.3	Same as paragraph 8.3
Salt Spray	Appearance: No damage. Contact Resistance 40m.	Temperature: 353. Concentration: 51% NaCl solution. Period: Stamping after tin plated for 8 hours OR Stamping before tin plated for 24 hours.
Solder Ability	Soldering area: 90%.	Solder temperature: 2455. Immersion period: 3 0.5S.
Resistance to Soldering Heat		Manual Soldering: Soldering temperature: 350 5, Time: 30.5S. Wave Soldering: Soldering temperature: 260 5, Time: 50.5S. Position: 1.5mm from end of conductor or fixed piece.