PHB Connector Double Row 2 Millimeter Pitch HCTL HC-PHB-2*6EY-05 Suitable for Electrical Connections

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This specification document outlines the requirements for the 2.00MM PITCH PHB CONNECTOR DOUBLE ROW TYPE, part number HC-PHB - ****. It covers product performance, test methods, and inspection requirements for this series of connectors. The product is designed for electrical applications requiring reliable connections within specified environmental and operating conditions.

Product Attributes

Brand: HCTLDZ ()
Origin: Shenzhen, China
Certifications: UL94V-O (for Housing Plastic)
Color: Nature (for Housing Plastic and Contact)

Technical Specifications

Item	Specification	Test Method
Scope	2.00 series connector strip
	Product performance, test methods and inspection requirements
	Surface without harmful defects, dirt, cracks, or mechanical damage. Contact parts without rust, plating oxidation, or peeling.
	Exchangeable with same specification products.
Use Condition	Ambient temperature: -25 +85
	Applicable wire sizes: AWG #22#28
	Applicable PC board thickness: 1.6mm
Appearance and Dimension	Appearance: Product surface without defect, dirt, crack, and mechanical damage; contact without rust plating, not oxides and not peeled.
Appearance and Dimension	Dimensions: According to drawings
Material	Part No.	Type	Material	Thickness	Finish	UL Rating
	Terminal Contact		Brass	0.50mm	Tin plating: 2.55 m
	Housing Plastic		Nylon66			UL94V-O
	Plastic Wafer		Nylon66			UL94V-O
	Contact		Brass	0.50mm	Tin plating: 2.55 m
	Plastic Wafer		LCP			UL94V-0
Electrical Performance	Rated Voltage	250V AC/DC
	Rated Current	2A AC/DC
	Withstand Voltage	800V AC (rms) for 1 minute between adjacent contacts (no breakdown or flashover)	Apply 800V AC(rms)for 1 minute and the leakage current shall not exceed 0.5mA to the adjacent terminal and ground of the mate connectors
	Contact Resistance	20m (Initial value)	Apply a maximum voltage of 20mV and maximum current of 100mA to the mate connector
	Insulation Resistance	1000 M	Apply 500V DC (rms) for 1 minute between adjacent contacts
Mechanical Performance	Terminal crimping wire pullout force	AWG#22: 50N, AWG#24: 30N, AWG#26: 20N, AWG#28: 13N	Axial pullout force at a rate of 253mm per minute
	Fixed terminals and hole seat fixing force	12N	The terminal and hole seat are pulled apart at a rate of 253mm per minute along the wire direction
	Single contact withdrawal force	0.3N
	Single contact insertion force	5N
	Seat pull-out force	15N	Exert a force on the pin end at a rate of 253mm per minute until the needle exits the seat
	Pin Retention Force
Durability	Durability cycles	30 cycles	Mate connectors up to 30 cycles at a maximum rate of 10 cycles per minute prior to environmental test
	Contact Resistance after durability	40m
	Appearance after durability	No damage
Vibration	Vibration test	Amplitude: 1.5mm p-p, Frequency: 10-55-10Hz/minute, Period: 2 hours for each direction (X, Y, Z axis)	Mate connector combination state, welded to PCB, tested for vibration
	Current Discontinuity	Max 1 sec	During vibration test
	Contact Resistance after vibration	40m	After vibration test
	Appearance after vibration	No damage	After vibration test

Thermal Aging	High temperature aging test	Temperature: 852, Period: 96 hours continuously	Connector combination placed in a heating oven
	Contact Resistance after aging	40m	After aging test
	Appearance after aging	No damage	After aging test
Temperature Rise	Temperature rise of contact	Measure temperature rise when maximum rated current is passed	Connector combination condition


Humidity	Constant temperature and humidity test	Temperature: 402C, Relative humidity: 90-95% (RH), Period: 96 hours continuously	Connector combination placed in a constant temperature and humidity chamber
	Contact Resistance after humidity	40m	After humidity test
	Insulation Resistance after humidity	1000m	After humidity test
	Appearance after humidity	No damage	After humidity test
Temperature Cycling	Temperature cycling test	-553C for 30min, 853C for 30min, with 10-15min transition time, Total 5 cycles	Connector combination subjected to thermal shock
	Contact Resistance after cycling	40m	After cycling test
	Insulation Resistance after cycling	1000m	After cycling test
	Appearance after cycling	No damage	After cycling test
Salt Spray	Salt spray test	Temperature: 353C, Concentration: 51%	Connector combination subjected to salt spray
	Contact Resistance after salt spray	40m	After salt spray test
	Appearance after salt spray	No damage	After salt spray test

Solder Ability	Solder ability test	Solder temperature: 2455C, Immersion period: 3 0.5S	Placed in a tin soldering bath
	Soldering area	90%

Resistance to Soldering Heat	Manual soldering	Soldering temperature: 350 5 C, Soldering time: 3 0.5S	DIP type needle solder position, 1.5mm from conductor end
	Wave soldering	Soldering temperature: 260 5C, Soldering time: 5 0.5S
	Contact Resistance after soldering	40m	After soldering test
	Appearance after soldering	No damage	After soldering test