2.00mm Pitch PH Connector Double Row Type HCTL HC-PH-4Y-B-05 for Electrical Electronic Applications

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This specification covers the 2.00MM PITCH PH CONNECTOR DOUBLE ROW TYPE, designed for electrical and electronic applications. It details product performance, test methods, and inspection requirements, ensuring interchangeability and reliability under specified environmental conditions.

Product Attributes

Brand: HCTLDZ ()
Origin: Shenzhen, China
Certifications: UL94V-0 (for Nylon66 housing)
Color: White (Housing), Nature (Contact)
Material: Brass (Contact), Nylon66 (Housing), Phosphor bronze (Contact)

Technical Specifications

Item	Requirement	Test Mode
3. Use Condition
Ambient temperature	-25 +85
Applicable Wire Sizes	AWG #2430
Applicable PC board thickness	0.81.6mm
4. Appearance and Dimension
Appearance	Product surface without defect, dirt, crack, and mechanical damage; contact parts without rust, plating oxidation, or peeling.
Dimension	According to drawings
Interchangeability	Exchangeable with same specification products.
6. Electrical Performance
Rated Current	2A AC/DC
Rated Voltage	100V AC/DC
Withstand voltage	No breakdown or flashover	Apply 800V AC(rms) for 1 minute and the leakage current shall not exceed 0.5mA to the adjacent terminal and ground of the mate connectors
Contact Resistance	Initial value 20m	Apply a maximum voltage of 20mV and maximum current of 100mA to the Mate connector (Does not include wire resistance)
Insulation Resistance	1000 M	Apply 1000V DC(rms) for 1 minute between adjacent contacts to measure the insulation resistance
7. Mechanical Performance
Terminal crimping wire strength	30N (AWG#24), 20N (AWG#26), 13N (AWG#28), 8N (AWG#30)	Axial pullout force at 25 3mm/min
Single contact Withdrawal force	2N	Axial pullout force at 25 3mm/min
Fixed terminals And hole seat	12N	Pullout force at 25 3mm/min along the wire direction
Single contact insertion force	10N	Inserting force test at 25 3mm/min
Seat pull-out force	12N	Force applied to pin end until needle exits seat at 253mm/min
Pin Retention Force
Durability	Contact Resistance 40m	Mate connectors up to 30 cycles at a maximum rate of 10 cycles per minute prior to environmental test
Vibration	Appearance: No damage; Contact Resistance 40m; Current Discontinuity: Max 1 micro second	Amplitude: 1.5mm p-p; Frequency: 10-55-10Hz/minute; Period: 2 hours for each direction (X, Y, Z axes)
8. Environmental Performance
Thermal Aging	Appearance: No damage; Contact Resistance 40m	Temperature: 852; Period: 96 hours continuously
Temperature Rise		Measure contact temperature rise when maximum rated current is passed
Humidity	Appearance: No damage; Contact Resistance 40m; Insulation Resistance 1000m	Temperature: 402; Relative humidity: 90-95% (RH); Period: 96 hours continuously
Temperature cycling	No breakdown or flashover	One cycle: -553C for 30min, then 853C for 30min, with 10-15min transition time. Total 5 cycles.
Salt spray	Appearance: No damage; Contact Resistance 40m	Temperature: 353; Concentration: 51% Salt Solution; Period: Stamping after tin plated for 8 hours / Stamping before tin plated for 24 hours
Solder ability	Soldering Area: 90%	Solder temperature: 2455C; Immersion period: 3 0.5S
Resistance to soldering heat	Appearance: No damage	Wave soldering: 260 5C, 5 0.5S; Hand soldering: 350 5C, 3 0.5S