2.00mm Pitch PHB Connector Double Row Type HCTL HC-PHB-2*8EY-05 Electrical Connector for Wire and PCB

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

The 2.00MM PITCH PHB CONNECTOR DOUBLE ROW TYPE is a series of connectors designed for electrical applications. It offers reliable performance, with specifications covering electrical, mechanical, and environmental characteristics. This connector is suitable for use with various wire gauges and PC board thicknesses, ensuring interchangeability with products of the same specification.

Product Attributes

Brand: HCTLDZ ()
Origin: China
Certifications: UL94V-O (for Housing Plastic and Plastic Wafer)
Color: Nature (for Housing Plastic and Plastic Wafer)

Technical Specifications

Item	Requirement	Test Mode
4. Appearance and Dimension
Appearance	Product surface without defect, dirt, crack, and mechanical damage; contact parts without rust, plating oxidation, peeling, etc.	General Principles
Dimension	According to drawings
Exchangeable	Exchangeable with same specification products.
3. Use Condition
Ambient temperature	-25 +85
Applicable Wire Sizes	AWG #2228
Applicable PC board thickness	1.6mm
6. Electrical Performance
Rated Voltage	250V AC/DC
Rated Current	2A AC/DC
Withstand voltage	No breakdown or flashover	Apply 500V DC (rms) for 1 minute between adjacent contacts to measure the insulation resistance
Contact Resistance	Initial value 20m	Apply a maximum voltage of 20mV and maximum current of 100mA to the mate connector (Does not include wire resistance)
Insulation Resistance	1000 M	Apply 800V AC (rms) for 1 minute between adjacent terminals and ground of mate connectors, leakage current must be less than 0.5mA
7. Mechanical Performance
Terminal crimping wire pullout force	AWG#22: 50N, AWG#24: 30N, AWG#26: 20N, AWG#28: 13N	Axial pullout force at a rate of 25 3mm per minute
Terminal and hole seat fixed force	12N	Mate housing and terminals with wafer at a rate of 25 3mm per minute
Single contact withdrawal force	0.3N	Terminal pulled out from the hole seat at a rate of 25 3mm per minute along the wire direction
Single contact insertion force	5N	Pin end force applied at a rate of 25 3mm per minute
Pin Retention Force	15N	Mate housing and terminals with wafer at a rate of 25 3mm per minute
Durability	Contact Resistance 40m; Appearance: No damage	Mate connectors up to 30 cycles at a maximum rate of 10 cycles per minute prior to environmental test
Vibration	Current Discontinuity 1 micro second; Contact Resistance 40m; Appearance: No damage	Amplitude: 1.5mm p-p; Frequency: 10-55-10Hz/minute; Period: 2 hours for each direction (X, Y, Z axis)
8. Endurance Characteristics
Thermal Aging	Contact Resistance 40m; Appearance: No damage	Temperature: 852; Period: 96 hours continuously
Temperature Rise	Measure temperature rise of contact when maximum rated current is passed	Connector in combined state
Humidity	Contact Resistance 40m; Insulation Resistance 1000m; Appearance: No damage	Temperature: 402; Relative humidity: 90-95% (RH); Period: 96 hours continuously
Thermal Shock	Contact Resistance 40m; Insulation Resistance 1000m; Withstand voltage: No breakdown or flashover; Appearance: No damage	Cycle: -553 (30min) -> 10-15min room temp -> 853 (30min) -> 10-15min room temp. Total cycle: 5 cycles
Salt Spray	Contact Resistance 40m; Appearance: No damage	Temperature: 353; Concentration: 51% (NaCl solution); Period: Stamping before tin plated for 24 hours or Stamping after tin plated for 8 hours
Solder Ability	Soldering area: 90 %	Solder temperature: 2455; Immersion period: 3 0.5S
Resistance to soldering heat	Appearance: No damage	Manual soldering: Soldering temperature: 350 5 ; Soldering time: 3 0.5S. Wave soldering: Soldering temperature: 260 5 C; Soldering time: 5 0.5S