IEC 60745-2-5 Test Probe For Circular Saw Guard Diameter 12mm Length 50mm
|
...Test Probe a for Circular Saw Guard Test, diameter 12mm, length 50mm Standard: IEC 60745-2-5 : Particular requirements for circular saws, clause 19.101.2 and Figure 105 Application: This probe is applicable to verify the upper guard protection against to touch the blade. Test sample: Circular saws Test Finger Probe Feature: Apertures in the guarding......
Guangzhou HongCe Equipment Co., Ltd.
|
Integrated Lower Guard Circular Saw IEC Test Equipment Mitsubishi Plc
|
... Saw Product information: This device conforms to the standard requirement of EN 60745-2-5:2010 clause 19,IEC60745-2-5:2003 and Annex BB. It is used to test the Durability Test and Close time Test for the lower guard. The saw is to be set for a 90°cut and...
Dongguan Kingpo Technology Limited
|
IEC 60745-2-5 Figure 105 Probe "A" With Probe Length 50mm For Circular Saws Test
|
....2 and Figure 105 Application: This probe is applicable to verify the upper guard protection against to touch the blade. Test sample: Circular saws Feature: Apertures in the guarding system above the guide plate, unless otherwise specified below, shall be...
Sinuo Testing Equipment Co. , Limited
|
IEC 60745 2 5 Electric Testing Equipment Circular Saw Lower Guard Test
|
Circular Saw Lower Guard Test Device HDD8302 Standard: IEC 60745-2-5 : Particular requirements for circular saws, clause 19.102.3 and Annex BB, EN 60745-2-5 Application: This device is applicable to test the closing time and mechanical strength of lower guard for circular saws. Test sample: Circular saws Feature: The saw is to be set for a 90°cut and oriented in the horizontal plane. The lower guard......
shanghai kerang technology co ltd
|
IEC60745-2-5 Lower Guard Durability Test And Close Time Test Equipment With Circular Saw At A 90°Cut
|
...Guard Durability Test and Close time Test Equipment with Circular Saw at a 90° cut Product information: This device conforms to the standard requirement of EN 60745-2-5:2010 clause 19,IEC60745-2-5:2003 and Annex BB. It is used to test the Durability Test and Close time Test for the lower guard. The saw is to be set for a 90°cut and oriented in the horizontal plane. The lower guard......
KingPo Technology Development Limited
|
10 Freq/Min 220V 50Hz IEC Integrated Test Device for Circular saws
|
...Test Equipment Integrated Test Device For Circular Saw Switch And Lower Guard Standard: IEC60745-2-5 ‘Hand-held motor-operated electric tools - Safety - Part 2-5: Particular requirements for circular saws’.2003 Annex BB.20.102. EN 60745-2-5: 2010 clause 17.101 and clause 19.102.3. EN 60745-2-5: 2010 Annex M21.18, Annex M21.18.301, Annex M21.203, Annex M21.301, figure M.301. Application: It is used to test the circular saw......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
Diamond Circular Saw Blade Granite Cutting Blade Stone Circular Saw Blade
|
... and marble machines, without chipping, sharp and wear-resistant 3. Suitable for cutting concrete walls, red bricks, cement walls, etc. 4. Mouth guard design. Diamond cutter head. Wet and dry, sharp and wear-resistant Advantages of...
Zhongzuan (Chongqing ) Precision Tools Manufacturing Co., Ltd.
|
Large Automatic Circular Saw Blade Grinding Machine LDX-026A
|
...properly tightened, the forward displacement of the saw blade will be inaccurate. 2,Therefore, after installing the saw blade, turn the circular saw blade counterclockwise with the left hand to test the tightness of the rotation. 3,If the tightness is not...
FOSHAN LIDEXIN MACHINERY MANUFACTURING CO., LTD.
|
UL test Probe UL 60950 UL474 UL507 UL1017 UL60065,test probe
|
...test Probe UL 60950 UL474 UL507 UL1017 UL60065 Model TPU6: UL test probe For testing accessibility to hazardous moving parts such as access tofan blades through a fan finger guard. Complies with UL Standards. Made entirely of stainless steel, weighs 1 lb. UL test Probe......
ALLIED TESTING (HK) CO.,LTD.
|
IEC60335-2-14 Jointed Finger Test Probe with 125mm
|
...test probe that is similar to test probe B of IEC 61032 but having a circular stop face with a diameter of 125 mm instead of the non-circular face, the distance between the tip of the test finger and the stop face being 100 mm. Test probe that is similar to test probe B of IEC 61032 but having a circular stop face with a diameter of 50 mm, instead of the non-circular......
HK LEE HING INDUSTRY CO., LIMITED
|
Submit your “circular saw guard test probe” inquiry in a minute :