Block Machineinterlocking Bricks Machine Cross Cutting AAC Machine Overturn Table

Sankon company provide a wide range of building material machines, including block making machines, concrete panel machines, dry mortar machines, and more.

AAC Block Cross Cutting Machine

1. AAC(Aerated Autoclaved Concrete Block Machine Line)
(1)Introducation:
Areated concrete brick (light brick) is the light and porous buidling material. It has light keeping temperature cant burn and other advantages. It can be made into many kinds of bricks(for example: 600×200×100mm, 600×150×100mm, 600×300×200mm, 600×200×150mm), they could be used industry building and common building. They are more and more popular in the world. In the future, they will replace the clay brick completely.

(2)Areated concrete common conception:
Common concrete density is usually 1600-2400kg/m3, but areated concrete are 500kg/m3, 600kg/m3, 700kg/m3. It has not the big grain, main use silicon material (for example: coal ash, sand, stone dust and others)through making the material small for example sand, they can be used directly if has enough degree of small(for example: coal ash). Mixing calcium material lime cement water to a special slop, then add the aluminum dust and the additive. Make the aluminum dust and the special slop have a Chemical reflect. Then produce Hydrogen to make the concrete slop to expanding or swell foam. Next, put them into the curing room to concreting cutting steaming curing. Finally, there will become the light brick. The porous rate is 70-80%.

(3)Advantages:
Light weight
Areated concrete density is usually 400-700kg/m3(according the market production), same as 1/3 of clay brick and 1/5 common concrete. So use the Light brick can reduce the weight of the build more ,and also reduce the beam of roof and pillar press best . then you can see, it can save the material and cost, it also fighting shaking.
Keeping temperature
It has many are porous, the delivery hearting coefficient is 0.9-0.22W/(mk), the same as 1/4 or 1/5 of clay brick, so it is best materials now in the world.
Have many kinds material, have lowest waste
Main Material: Sand/Flyash 65-70%, Cement 12-15%, Lime powder 12-15%, Gypsum 3-5%, Aluminum 0.5kg/m3 AAC block

2.AAC Line Capacity description:
Main raw material: Silica Sand
Cutting machine size:
(1)4.2m cutting machine, 50000-150000m3/Year(160-500m3/Day), land requires 8000-15000m2
(2)4.8m cutting machine, 150000-240000m3/Year(500-800m3/Day, land requires 15000-20000m2
(3)5m cutting machine, 200000-300000m3/Year(700-1000m3/Day, land requires 25000-30000m2

(4)6m cutting machine, 200000-300000m3/Year(700-1000m3/Day, land requires 30000-45000m2
Mould net size(after cutting):4.2x1.2x0.6m /4.8x1.2x0.6m / 5x1.2x0.6m /6x1.2x0.6m
Autoclave: Φ2x31.5m, Φ2.5x32m, Φ2.68x2m, depends on different capacity.

3.AAC block reference material consume list(only for reference)
AAC block model:
B04 grade, average density 400-425kg/m3, pressure 2.0-2.5Mpa
B05 grade, average density 500-525kg/m3, pressure 2.5-3.5Mpa
B06 grade, average density 600-625kg/m3, pressure 3.5-5Mpa
For example 550kg/m3 AAC block, we need the raw material list as following, just for reference, finial formula will be designed by engineers according to the materials that clients need.

We are professional AAC block making machine and concrete block machine company, company exported more than 90 countries and areas, products passed Europe CE standard. We have 4.2m, 4.8m, 5m,6m cutting system, if you have interesting about our machine, welcome to contact us.

Formerly known as Wuxi SANKON Automation Equipment Co., Ltd., Jiangsu SANKON Building Materials Technology Co. is an enterprise specializing in the research and development and production of a complete range of autoclaved aerated concrete (AAC) machines and AAC production lines. Since 2007, we have introduced a number of new types of building materials equipment. We have been actively analyzing cutting-edge technology from all over the world and have formed a professional technology team focused on the development of new and exciting processing equipment.

In July, 2014, Jiangsu SANKON Building Materials Technology Co., Ltd. was officially founded in Chuanjiang Town, Xinbei District, Changzhou City, Jiangsu Province, with a factory covering 44700 square meters. Today, we have more than 200 employees. The AAC machines manufactured by SANKON has been exported to a wide range of countries, like Russia, India, Iran, Saudi Arabia, Malaysia, Indonesia, Thailand, Vietnam, the United Arab Emirates, and more.

Professionalism
SANKON has always focused on the design and production of high efficiency AAC machines, resulting in the accumulation of valuable experience and engineering techniques.

Our technical team is made up of experts with more than 20 years of experience in the AAC industry. They are professionals with expertise in project design, production processes, and detail control. Some of them worked for the China AAC Institute before they came to SANKON, then they focused all of their efforts into the AAC industry.

With this excellent technical team, we are able to offer clients solutions and equipment that meets all relevant production quality requirements, as well as help building materials manufacturers maximize their economic returns.

Autonomous Production
With an annual production capacity of more than 9 thousand tons of equipment and workshops covering about 25 thousand square meters, SANKON is able to autonomously complete machining, painting, assembling, and testing processes. Parts like metal bodies, hydraulic pressure stations, electric control cabinets and so on are all produced by SANKON.

We are able to offer complete sets of equipment for AAC production line. SANKON is also able to precisely control the function and quality of each piece of equipment to meet customer needs.

Continuous Innovation
Based on German technology, we developed the AAC production lines with additional specifications. At the same time, we have been consistently improving our equipment offerings to meet the various needs of customers.

For instance, the blade used in the pouring mixer was updated from a conventional single blade to a cross blade and flow diversion blade, and now the high speed double blade design results in higher stirring efficiency. The driving method is updated from belt drive to variable frequency drive as it is now directly connected. Besides, each connecting piece is fine finished by us.

Currently, SANKON has obtained 19 patents for components applied in our AAC cutter, mold, transfer cart for AAC block pre-curing and batching automatic control system.

Market Prospect
For many years, SANKON has been focusing on the research and development of AAC machines, as well as collaborating with AAC product manufacturers and providing AAC production line solutions to these AAC product manufacturers. We have served hundreds of clients in the building materials industry and have achieved wide praise.

In recent years, we have developed quickly and achieved production value of tens of millions of dollars.