Building Material Ignitability Test Apparatus-- Single-Flame Source Test

HTB-007 Building Material Ignitability Test Apparatus-- Single-Flame Source Test

Ignitability test, also called single-flame source test.Test apparatus corresponds to standard EN ISO 11925-2. Test results of the building structure can be classified according to standard 13501-1.

The dimensions of the test specimens shall be (250 ) mm long by (90 ) mm wide.

45°-tilted burner is advanced horizontally until the flame (length 20 mm) reaches the pre-set contact point with the test specimen. Tests may need to be conducted to either surface exposure or edge exposure, or both. The flame application time is 15 or 30 seconds as required by sponsor.

During the test following is recorded: whether ignition occurs; whether the flame tip reaches 150 mm above the flame application point, and the time at which this occurs; whether ignition of the filter paper occurs; observations of physical behavior of the test specimen.

Specifications:

This apparatus made up of two parts: burning chamber and control device.

Power supply: AC220V±10%,50Hz；

Burner: diameter 0.17mm burner with regulator; four ￠4mm air suction inlet;

Gas source:>95% porpane gas;(user should provide for themselves)

Gas pressure:10kpa~50kpa

Flue air velocity:0.7m/s only on condition of burner burnning and draught hood open,

Time adjustment of continuous flame: 0 ~ 99minutes99seconds

Time adjustment of afterflame: 0 ~ 99minutes99seconds

Timer accuracy:≤1s/h

Anemometer accuracy:±0.1m/s.

Burner angle: 45°

Material: stainless steel

Observing window: two big viewing windows on the front and right side

Whole set: control device, burning chamber,burner,magnetic valve,flame lighter, signal control line and specimen holder.

Equipped with a digital anemometer/thermometer and a stopwatch for simple but accurate measurement of the flow, temperature and time.

Dongguan Hust Tony instruments Co., Ltd ( Tony International(HK)Co., Ltd. ) has been manufacturing and developing testing machines for more than 15 years.

Our Main products are Furniture Testing Instrument, Toys Testing Equipment,Textile Testing Instrument, Leather shoes Test Equipment, Universal Testing instruments, Continue its advanced design technology and concept, excellent technology of producing and outstanding system of quality management, Tony Instruments has achieved good repute in the fields of textile testing equipments, toy testing equipments, furniture testing and other measurement test equipments. Our long-term partners include the world's two largest inspection companies SGS and TUV. 

We produce equipments in line with international market testing standards, meanwhile, we provide customers with complete solutions for laboratory testing. 

- Design program for laboratory 

- Provision of all testing machines and consumables 

- Installation and training 

- Maintenance plan service 

- Professional calibration and measure services 

Some of our important customers, include: 

SGS in France, SGS in Vietnam, SGS in China, SGS in Korea, Intertek in China, SAT in China, BACL in Shenzhen, NSF in Shanghai, ITS, BV, TUV and etc. 

Sincerely administration make Tony sales network extend all over the world. Up to day Tony products spread to countrywide users. In overseas, we have customers from Vietnam, Thailand, Indonesia, Europe, Iran, Pakistan, USA, Canada, Mexico, Argentina and etc. 

Our Testing machines are widely used in Textile, Toys, Furniture, packaging, footwear, leather products, environment, baby products, hardware, electronic products, plastic products, rubber products and other industries, and are applicable to all scientific research units, quality inspection institutions and academic fields.