Single Or Multiple Layer Punched Polyethylene Mesh Filter Stampings Part Discs Irregular Shapes

At SHARE, we manufacture high-quality precision open mesh filter fabrics from synthetic fibers in nylon, polyester, polypropylene and polyethylene. Our filter mesh are with great accuration and regular even square holes, food grade, very good dimensional stability and no any chemicals treatment in the production process.

We are able to convert filter mesh fabrics into various specific sizes and shapes such as discs, stampings, tubes, ribbons, shapes, cut-to-size sections, pleated elements, bags, plastic molded products and many more. We customize mesh components to fit our customers' needs and enhance our fabrics with special treatments to improve their performance.

Monofilament woven mesh shapes

PA, PET, PP, PE materials
Precise mesh opening

Single or multiple layer shapes

Fabrication technologies: Cold, heat, ultrasonics, laser, sew, injection molding etc.

Polygons or irregular cut flat pieces

Fabrication capabilities: ribbons, cuts, tubes, shapes, bags, molded filter products, etc.

Injection molding filters

Fabricated filter shapes are essential for injection molding

Your Benefits

• Wide range of materials(nylon, polyester, polypropylene, polyethylene) and micron sizes available
• Supplied in the form of rolls, pieces, shapes, ribbons, tubes, molded products
• Precision uniform mesh opening and smooth surface
• Custom cutting service, tight tolerances
• Unlimited shapes, clean sealed edges
• Free samples
• 2 days or less lead time

Gallery

SHARE Converting Capabilities

SHARE Fabricated Product	SHARE Fabrication Capabilities
	COLD	HEAT	ULTRASONICS	LASER
Continuous & tubular ribbons	Ribbon	Ribbon	Ribbon
		Double seam tubular ribbon	Double seam tubular ribbon
		Multiple layer ribbon	Multiple Layer ribbon
			Multiple layer tubular ribbon
			Single seam tubular ribbon
Tubes & Rectangles	Filter segment, two sides heat cut, two sides cold cut		Rectangle, four sides ultrasonically cut
		Rectangle, two sides heat cut and two sides ultrasonically cut
	Tube, two open ends	Tube, two open ends, hot wire cut
			Tube, one end sealed	Tube, two open ends, laser cut
			Tube special execution (single/double layer)
			Biopsy bag with or without flaps
Shapes	Cold punched part (single layer)		Punched part (single or multiple layer)	Single layer shapes, laser cut
Pleated Element			Pleated pack (ultrasonically cross cut)
			Pleated cartridges (ultrasonically sealed)
Cone Shaped (Truncated)			Single seam
			Double seam (single/double layer)

​

Customers have different requirements for filtration, separation and sifting, and relying only on single fabrication technology is not sufficient to meet the challenges of today's demanding filtration market. Therefore, SHARE has developed expertises and experiences in almost all processing technologies including cutting, stitching, gluing, welding, laser cutting, molding and more after decades of developments.

1. Laser Cutting

Laser cutting produces highly precise fabric parts with

a heat-sealed edge.

Share uses different laser cutting systems to meet

customers various requirements including

semi-automated vision systems

and fully automated with AI programming.

2. Heat Slitting

Heated knives are used to create fabric strips/ribbons for much many applications such as injection molding, and hot-cut mesh edges are melted to enhance durability.

Optical measuring systems measure ribbon width with tight tolerances.

3. Ultrasonic Slitting

Ultrasonic slitting are often used to produce fabric strips

with closed edge, minimal material build-up.

Ultrasonic cutting is ideal for precise and clean edge

quality, and measurements are conducted using

optical systems too.

4. Ultrasonic Stamping

Often used for highly precise fabric parts.

Ultrasonic stamping ensures tight geometric tolerances. The edges are non-fraying. One tool is used for punching and can be used for larger quantities. Optical measuring systems measure dimensions and tolerances.

5. Ultrasonic Welding

Ultrasonic welding has accurate, clean welds without

introducing secondary materials.

SHARE produces precision plastic cylindrical filters

by using ultrasonic welded tubes.

6. Pleating

We increase the filter surface through pleating. Fabrics are firstly welded then pleated together, and cut to size of pleats.

7. Sewing

Sewing and stitching are very suitable for various of mesh

filter bags.

The thread, patch and stitch can be customized

on demand.

8. Plastic Injection Molding

Share plastic filters provide h igh flow rates and low pressure drops by maximum open area.

SHARE process our mesh fabrics to various plastic molded filters for automotive, chemical, medical, home appliance and f ood industry by plastic insert molding and overmolding technologies.

Company Profile

Established in 1983, Taizhou Share Filters Co., Ltd. offers a comprehensive range of woven monofilament filter mesh fabrics(nylon, polyester, polypropylene etc.) with micron ratings ranging from 3um to 4mm. We specialize in engineering woven fabrics into finished or partly finished products.

Our products ranges:

• Monofilament Mesh Rolls
• Discs, Tubes, Ribbons, Bags
• Plastic Molded Filters

Whether you want to improve the quality or reduce the cost of your existing filter component, plan a new filtration application, or need assistance with specifications and design validation, SHARE application specialists with decades of experience will help you create the best filter solution for your application.

Contact SHARE today for additional information and how we can help you with your specific filtration requirements.

Packaging & Shipping

For mesh rolls:
1. Rolled on the paper core, 30-70m/roll, packed into PE bags, the product label is attached on the edge of each roll
2. 2-8 rolls per standard export carton
3. Put into PP woven bag to prevent damage during transportation
4. Package belt strengthen

For fabricated&molded filters:
1. Packed into sealed PE bags, 10pcs to 500pcs/bag according to the actual size, double bagged and the product label is attached in the inner bag
2. Put into bigger PE bag and then standard export carton
3. Wrapped the outer carton with PE stretch film to prevent damage during transportation
4. Package belt strengthen if pallets are available

The label contains the following standard information:
item name, manufacturer, material, dimensions, manufacturing date, order number, batch number etc.

	Port to Port	Door to Door
Express(DHL,UPS,FEDEX, EMS)		1 - 5 days
Air Freight	1 - 5 days	4 - 10 days
Sea Freight(FCL)	15 - 30 days	20 - 35 days
Sea Freight(LCL)	15 - 30 days	22 - 37 days

FAQ

​​1. Where is your factory located? How can I visit there?

We are in Taizhou city, Zhejiang province China. By train, we are one hour away from Hangzhou and two hours away from Shanghai.

2. Can I get free samples and how long can you deliver them?
We are pleased to provide you with free samples for your evaluation, which will be sent to you within 2 days. Please feel free to reach out to us for samples.

3. How long does a quotation take?
In most cases, we respond within 2 days. If something in RFQ need be confirmed, we will promptly notify you soon.

4. How quickly can I get my order finished?
The production lead time is dependent on the quantity. Typically, it takes 5 to 15 working days for us to complete mass production once you have placed the order.

5. What about your quality control?
By visual inspection, optical or pressure sensitive equipment and automated 3D image-inspection equipment, our production operators conduct self-inspections at every stage of the process. Additionally, we have spot inspections and final inspections carried out by our Quality Control (QC) team.

6. What's your largest advantage?
One of our core competencies is our excellent converting capabilities from yarn over weaving to converted items with professional technical team and quality guarantee and management for more than 30 years.

7. What kind of payment terms do you accept?
T/T and LC and more.

Introduction:

SHARE GROUP LIMITED (hereinafter short for SHARE) is an enterprise set up in 1983, producing and supplying filter fabrics back then. After more than 30 years of fast development, SHARE has successfully developed and evolved into a big group company owning three production units, producing Filter Clothes, Printing Mesh and Plastic Filter Parts separately, however, Sales, After-service and Accounting are maintained and operated under the name of SHARE.

What SHARE offers:

• Industrial Filter Fabrics: Polyester Filter Cloth, Polyamide Filter Cloth, Polypropylene Filter Cloth, Airslide Fabrics, Polyester Filter Mesh, Polypropylene Filter Mesh, Nylon Filter Mesh, Stainless Steel Filter Mesh, Dust Collection and Liquid Filtration Felts and various kinds of Standard and Customized Liquid Filter Bags, Dust Collector Filter Bags made of Filter Mesh, Filter Cloth and Filter Felts.
• Silk Printing Mesh: Mono-filament Polyester Printing Mesh, Multifilament Polyester Printing Mesh, Nylon Printing Mesh, Stainless Steel Printing Mesh
• Molded Filters: Insert/Over-molded Plastic Filters, Rubber-molded Filters

Where SHARE products applied:

• Industrial Filtration: Automotive, Chemical Processing, Cooking Oil/Food Processing, Ethanol, Mining Operation, Municial Waterworks, Oil and Gas, Power Plants, Pulp and Paper Mills, Vehicle Washing Systems.
• Silk Printing: Electronic (Printed Circuits, Membrane Swtiches and Dials, Touchscreen and Displays), Glass, Graphics, Plastics and Packaging, Textiles, Ceramic and Tiles Industry, Solar.

How to contact SHARE:

1. By Phone: +86 (Country Code)-576-8950 8685
2. By Fax: +86 (Country Code)-576-8543 2410
3. By Email: sales@sharefilters.com or eric@sharefilters.com
4. By Submitting Online Inquiry: Send Inquiry
5. By Instant Message (The fastest and most convenient means):
   Skype: sharefilters
6. By Simple Contact Form: Simply submitting your general inquiries or questions by submitting the contact form from left sidebar, we will come back to you as soon as we can.

Customer Services:

SHARE always believes that selling products is not the end of the sales process, successful sales includes smooth pre-sale communication, supply of quality products and excellent after-sales customer service; By adhering to the corporate pholosophy " Quality is the flesh of the corporate, while Customer Satisfcation is the blood " ; By working with SHARE, you will get more than just the quality products at competitive price, you will get the best customer service.

If you need any customer service, please contact SHARE by either way listed above or simply write to us: service@sharefilters.com