Endotracheal Tube

Transparent PVC Endotracheal Tube with Balloon Tip and Standard 15mm ISO Connector The Endotracheal Tube is regarded as the most reliable available method for protecting a patient's airway. The cuffed ET Tube consists of tube, cuff, inflation line, valve, pilot balloon, and connector; The uncuffed ET Tube consists of tube and connector. Enhanced design may reduce micro-aspiration of potentially infectious pharyngeal secretions, as well as the potentially lowered risk of VAP

Micro-Thin PU Cuff Endotracheal Tube with Suction Port for Patient Airway Protection Endotracheal tubes are intended for oral intubation only for airway management of patients anticipated to require prolonged mechanical ventilation in critical care units. A blue inflation line and pilot balloon for inflating, deflating and monitoring the cuff. Feature Made of non-toxic medical-grade PVC, transparent, soft and smooth. With high volume, low pressure cuff. High Volume cuff seals

Oral And Nasal Intubation Reinforced Endotracheal Tube With Cuff Kink Resistant The Endotracheal Tube is supplied sterile with a stainless-steel, spiral-wound, reinforcing wire within the tube wall and bonded 15mm connectors, these tubes are designed to reduce kinks and disconnects. Endotracheal tube (ETT) has reinforced metal coils which make it less likely to get obstructed. Therefore, it is preferred for head and neck surgeries. Airway obstruction due to occlusion of

Camera Use Kink Resistance Reinforced Endotracheal Tube Vision Tube -It can be used to reinforced endotracheal intubation, and can also be inserted into the camera through the video channel to make intubation more accurate and fast. -The specially designed video channel enables the camera to be retained for a long time for easy observation and keeps enough space inside the tube to keep the intake channel smooth. Feature Endotracheal Tube is used to provide a direct and

PU Cuff Disposable Re-Inforced Endotracheal Tube with Suction Tube Discprition ust like standard ET tubes, armored or re-inforced tubes have the typical left-facing bevel at the tip and the Murphy eye. Their distinctive feature is a metal wire coil embedded in the wall of the tube shaft which keeps the lumen of the tube open when it is bent. The fact that this type of ET tube contains a metal wire coil means there is no need for a radio-opaque line. endotracheal tube (ETT)

Reinforced Endotracheal Tube PVC ET Tube PU Cuffed/Uncuffed Designed to help reduce risk of kinking* and aspiration The oral/nasal endotracheal tube, reinforced features a soft, flexible PVC tube with spiral-wound reinforcing wire is designed to help reduce the risk of kinking.* This tube was designed for neurosurgical or head and neck procedures when the patient's head is in an extended or flexed position, when patient will be turned over and/or in long-term cases where

PVC Suction Endotracheal Tube Dispoable ET Tube With Suction Port During mechanical ventilation, secretions from the upper respiratory tract accumulate above the endotracheal tube cuff. Studies have shown that these secretions can seep past the cuff into the lower tract, which may cause pneumonia. The Endotracheal Tube with Evacuation Lumen is designed to facilitate the removal of these pathogen laden subglottic secretions that accumulate above the cuff before they are

Murphy Eye Endotracheal Tube for Oral and Nasal Intubation in Medical Settings The Endotracheal Tube is regarded as the most reliable available method for protecting a patient's airway. The cuffed ET Tube consists of tube, cuff, inflation line, valve, pilot balloon, and connector. The Endotracheal Tube is supplied sterile with standard 15 mm connectors. The tube design incorporates a Magill curve and features a radiopaque line to assist in radiographic visualization. All

Endotracheal Tube Regular ETT Cuffed / Uncuffed ISO FSC Intubation Tube Manufactured from transparent pvc Clear connectors – EGBAT compliant Murphy Eye Single Use Latex Free DEHP Free 5-year shelf life allows long term storage and reduces waste Supplied in boxes of 10 Endotracheal Tube Regular ETT Cuffed / Uncuffed ISO FSC Intubation Tube Endotracheal Tube Regular ETT Cuffed / Uncuffed ISO FSC Intubation Tube Cuffed Uncuffed ID(mm) ID(mm) MC-15125 2.5 MC-15125U 2.5 MC-15130 3

PVC Material Endotracheal Tube With Suction Port for Patient Airway Protection Endotracheal tubes are intended for oral intubation only for airway management of patients anticipated to require prolonged mechanical ventilation in critical care units. A blue inflation line and pilot balloon for inflating, deflating and monitoring the cuff. Feature -Micro- thin PU cuff, all sizes available. -Softer, more tenacity and kink Resistant, high quality PVC material. -100% latex free

Standard Shape Plain Oral Endotracheal Tube ETT For Hospital Tender • Designed to direct tube downward to rest on patient’s chin • Allows circuit to be positioned out of surgical field; ideal for oral and maxillofacial surgery applications • Polished Murphy Eye • 15 mm Male fitting included • High volume, low pressure cuff • Valve with sensitive pilot balloon indicating cuff status • Radiopaque strip • Smooth beveled tip for atraumatic introduction Features -Clear graduated

Voice Subglottic Suctioning Endotracheal Tubes for Person Surgey Features - Suction port above the cuff Continuous aspiration of subglottic secretions It reduces the rate of ventilator-associated pneumonia (VAP) - Smooth Tip and Murphy eye The tube tip is heating smooth Murphy eye surface is heating drilling - Reinforced & Flexible Soft & flexible PVC material keep inside and wire spring undeformed Reinforced main tube reduces the risk of crushing when patient damage tubing

Reinforced Endotracheal Tube Disposable ETT PVC Tracheal Tube Armored endotracheal tube (ETT) has reinforced metal coils which make it less likely to get obstructed. Therefore, it is preferred for head and neck surgeries. Airway obstruction due to occlusion of armored ETT lumen after being bitten by patient is well known.Postoperatively, the orally intubated armored ETT has to be replaced with PVC ETT to prevent partial or total airway obstruction caused by biting. Reinforced

Kink Resistant Endotracheal Tube For Oral And Nasal Intubation With Cuff The Endotracheal Tube is supplied sterile with standard 15 mm connectors. The tube design incorporates a Magill curve and features a radiopaque line to assist in radiographic visualization. Endotracheal tube (ETT) has reinforced metal coils which make it less likely to get obstructed. Therefore, it is preferred for head and neck surgeries. Airway obstruction due to occlusion of armored ETT lumen after

Micro Thin Pu Cuff Endrotreal Tube For Adult ETT Without Cuff 2.0-10.0 High-quality endotracheal tube featuring micro-thin PU cuff technology for adult patients, available in sizes 2.0-10.0. Key Features Micro-thin PU cuff available in all sizes Constructed from softer, more tenacious and kink-resistant high-quality PVC material DEHP-free transparent main tube with clear markings Available with different soft balloon shapes Smooth tip with Murphy eye design Helps reduce

Disposable Steel Intubation ETT Tube Size 3.0 7.0 10.0 For Adult ICU Discprition The Endotracheal Tube is supplied sterile with standard 15 mm connectors. The tube design incorporates a Magill curve and features a radiopaque line to assist in radiographic visualization. Just like standard ET tubes, armored or re-inforced tubes have the typical left-facing bevel at the tip and the Murphy eye. Their distinctive feature is a metal wire coil embedded in the wall of the tube shaft

Disposable Medical PVC Oral Endotracheal Tube Tracheal Tube with Cuff Preformed Oral Nasal Cuffed Endotracheal Tubes. Made of PVC with high volume, low pressure cuff. These anatomically shaped tubes have a high-volume, low-pressure cuff in both cylindrical and tapered styles and are designed to provide an optimal seal at low pressures. Feature Non-toxic, medical grade PVC material Accurate depth marks Specially moulded hooded tip to assist intubation and to help to provide

Preformed Endotracheal Tube RAE ETT Disposable Nasal And Oral ET Tube Designed to direct the tube over the patient's forehead, reducing pressure on nares Allows circuit to be positioned out of surgical field; ideal for oral and maxillofacial surgery applications Polished Murphy eye 15 mm male fitting included; high-volume, low-pressure cuff; radiopaque strip; smooth beveled tip for atraumatic introduction Valve with sensitive pilot balloon indicating cuff status Preformed

Endotracheal Tube With Suction Port Regular ETT ISO FDA FSC -Micro- thin PU cuff, all sizes available. -Softer, more tenacity and kink Resistant, high quality PVC material. -100% latex free -Standard 15mm ISO connector -Radio opaque line provided -Accurate depth marks Endotracheal Tube With Suction Port Regular ETT ISO FDA FSC Endotracheal Tube With Suction Port Regular ETT ISO FDA FSC Cat.NO ID(mm) OD(mm) Length(mm) MC-15340 4.0 5.5 215 MC-15345 4.5 6.2 240 MC-15350 5.0 6.9

Transparent PVC Endotracheal Tube For Intensive Care Unit Patients with Balloon Tip The Endotracheal Tube is regarded as the most reliable available method for protecting a patient's airway. The cuffed ET Tube consists of tube, cuff, inflation line, valve, pilot balloon, and connector; The uncuffed ET Tube consists of tube and connector. Characteristics Non-toxic, medical grade PVC material For both oral & nasal intubation Atraumatic soft rounded beveled tip Accurate depth