Integrated Circuit Chip

ISL6314CRZ-T Controller Intel VR11 AMD CPU Voltage Regulator IC 1 Output 32-QFN The ISL6314 single-phase PWM control IC provides a precision voltage regulation system for advanced microprocessors. This controller IC maintains the same features as the multi-phase product family, but reduces the output to a single-phase, for lower current systems. By reducing the number of external parts, this integration is optimized for a cost and space saving power management solution. One

ISL8117AFRZ-T Buck Regulator Positive Output Step-Down DC-DC Controller IC 16-QFN Description The ISL8117 is a 60V high voltage synchronous buck controller that offers external soft-start, independent enable functions and integrates UV/OV/OC/OT protection. Its current mode control architecture and internal compensation network keep peripheral component count minimal. Programmable switching frequency ranging from 100kHz to 2MHz helps to optimize inductor size while the strong

ISL89412IBZ-T13 Low-Side Gate Driver IC Inverting Non-Inverting 8-SOIC The ISL89410, ISL89411, ISL89412 ICs are similar to the EL7202, EL7212, EL7222 series but with greater VDD ratings. These are very high speed matched dual drivers capable of delivering peak currents of 2.0A into highly capacitive loads. The high speed performance is achieved by means of a proprietary “Turbo-Driver” circuit that speeds up input stages by tapping the wider voltage swing at the output.

ISL8014AIRZ-T Buck Switching Regulator IC Positive Adjustable 0.8V 1 Output 4A 16-VQFN The ISL8014A is a high efficiency, monolithic, synchronous step-down DC/DC converter that can deliver up to 4A continuous output current from a 2.8V to 5.5V input supply. It uses a current control architecture to deliver very low duty cycle operation at high frequency with fast transient response and excellent loop stability. The ISL8014A integrates a pair of low ON-resistance P-Channel and

ISL80103IRAJZ-TK Linear Voltage Regulator IC Positive Adjustable 1 Output 3A 10-DFN The ISL80102 and ISL80103 are low voltage, high-current, single output LDOs specified for 2A and 3A output current, respectively. These LDOs operate from the input voltages of 2.2V to 6V and are capable of providing the output voltages of 0.8V to 5.5V. An external capacitor on the soft-start pin provides adjustment for applications that demand inrush current less than the current limit. The

ISL6843IBZ-T Boost Flyback Regulator Positive Isolation Capable Output Step-Up DC-DC Controller IC The ISL6840, ISL6841, ISL6842, ISL6843, and ISL6844 (ISL684x) family of adjustable frequency, low power, Pulse-Width Modulating (PWM) current mode controllers is designed for a wide range of power conversion applications including boost, flyback, and isolated output configurations. Peak current mode control effectively handles power transients and provides inherent overcurrent

TW6869-TA1-CRH Video Decoder IC DVR 144-TQFP (20x20) The TW6869 is a highly integrated solution that supports multi-channel video and audio capture via PCIe x1 interface for PC DVR system and video analytic application. It contains high quality eightchannel NTSC/PAL/SECAM video decoders that convert analog composite video signal to digital component YCbCr data, and utilize adaptive 4H comb filter for separating luminance and chrominance to reduce cross noise artifacts. TW6869

HIP4082IPZ Half-Bridge Gate Driver IC Non-Inverting 16-PDIPThe HIP4082 is a medium frequency, medium voltage H-Bridge N-Channel MOSFET driver IC, available in 16 lead plastic SOIC (N) and DIP packages. Specifically targeted for PWM motor control and UPS applications, bridge based designs are made simple and flexible with the HIP4082 H-bridge driver. With operation up to 80V, the device is best suited to applications of moderate power levels. Similar to the HIP4081, it has a

ISL99227FRZ-T Integrated High-Accuracy Controller PWM Interface 32-PQFN The ISL99227 and ISL99227B are Smart Power Stage (SPS) compatible with Intersil’s ISL68xxx/69xxx Digital Multiphase (DMP) controllers and phase doubler (ISL6617A), respectively. The ISL99227 and ISL99227B have integrated high accuracy current and temperature monitors that can be fed back to the controller and doubler to complete a multiphase DC/DC system. They simplify design and increase performance by

ISL6617AFRZ-T PWM Doubler PMIC Switching Controllers PhaseSplitter 3.3V The ISL6617A uses Intersil’s proprietary Phase Doubler scheme to modulate two-phase power trains with single PWM input. It doubles the number of phases that 3.3V multiphase controllers can support. The ISL6617A is designed to minimize the number of analog signals that interface between the controller and drivers in high phase count scalable applications. The common COMP signal, which is usually seen in

ISL29021IROZ-T7 Optical Sensor IR I²C 8-WFDFN Exposed Pad Light To Digital Converters The ISL29021 is an integrated proximity and infrared sensor with a built-in IR LED driver and I2C Interface (SMBus Compatible). This device provides infrared sensing to allow proximity estimation featured with interrupt function. For infrared and proximity sensing, an internal ADC has been designed based on the charge-balancing A/D conversion technique. The ADC is used to digitize the output

PIC16C712-04/SO PIC 16C Microcontroller IC 8-Bit 4MHz 1.75KB (1K X 14) OTP 18-SOIC Devices included in this Data Sheet: • PIC16C712 • PIC16C716 Microcontroller Core Features: • High-performance RISC CPU • Only 35 single-word instructions to learn • All single-cycle instructions except for program branches which are two cycle • Operating speed: DC – 20 MHz clock input DC – 200 ns instruction cycle • Interrupt capability (up to 7 internal/external interrupt sources) • Eight

NCP1910B65DWR2G PFC IC Continuous Conduction (CCM) 245kHz 24-SOICHoused in a SO−24WB package, the NCP1910 combines a state-of-the-art circuitry aimed to powering next generation of ATX or flat TVs converters. With a 65 or 100 kHz Continuous Conduction Mode Power Factor Controller and a LLC controller hosting a high-voltage driver, the NCP1910 is ready to power 85+ types of offline power supplies. To satisfy stringent efficiency considerations, the PFC circuit implements an

ATWINC1510-MR210PB1952 WiFi 802.11b/G/N Transceiver Module 2.4GHz Integrated Trace Surface Mount Introduction The ATWINC15x0-MR210xB is a low power consumption 802.11 b/g/n IoT (Internet of Things) module, specifically optimized for low power IoT applications. The module integrates Power Amplifier (PA), Low-Noise Amplifier (LNA), Switch, Power Management and a printed antenna or a micro co-ax (U.FL) connector for an external antenna resulting in a small form factor (21.7 x 14

9H03200030 32.768 KHz ±20ppm Crystal 12.5pF 90 KOhms 2-SMD No Lead Features ．2 pads surface mount package. ．Application for NB, Smart Phone, variety of compact portable consumer products reference clocks. ．High reliable environmental performance. ．RoHS compliant /Pb Free. specification of 9H03200030 Series 9HT12 Type kHz Crystal (Tuning Fork) Frequency 32.768 kHz Frequency Tolerance ±20ppm Load Capacitance 12.5pF ESR (Equivalent Series Resistance) 90 kOhms Operating Mode

MSP430FR2476TRHBR FRAM Microcontroller IC 16-Bit 16MHz 64.5KB (64.5K X 8) FRAM 32-VQFN (5x5) Description MSP430FR247x microcontrollers (MCUs) are part of the MSP430™ MCU value line portfolio of ultra-low-power low-cost devices for sensing and measurement applications. MSP430FR247x MCUs integrate a 12-bit SAR ADC and one comparator. The MSP430FR247x MCUs support an extended temperature range from –40°C up to 105°C, so higher temperature industrial applications can benefit from

PIC24FJ64GA002T-I/ML PIC® 24F Microcontroller IC 16-Bit 32MHz 64KB FLASH 28-QFN (6x6) High-Performance CPU • Modified Harvard Architecture • Up to 16 MIPS Operation @ 32 MHz • 8 MHz Internal Oscillator with 4x PLL Option and Multiple Divide Options • 17-Bit by 17-Bit Single-Cycle Hardware Multiplier • 32-Bit by 16-Bit Hardware Divider • 16-Bit x 16-Bit Working Register Array • C Compiler Optimized Instruction Set Architecture: - 76 base instructions - Flexible addressing

STM32F401RDT6 Microcontroller IC 32-Bit Single Core 84MHz 384KB Flash 64-LQFP The STM32F401XD/XE devices are based on the high-performance ARM® Cortex® -M4 32- bit RISC core operating at a frequency of up to 84 MHz. Its Cortex®-M4 core features a Floating point unit (FPU) single precision which supports all ARM single-precision dataprocessing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances

FSA644BUCX Cell Phone Interface 36-WLCSP (2.42x2.42) IC INTFACE SPECIALIZED Description The FSA644 is a four-data-lane, MIPI, D-PHY switch. This single-pole, double-throw (SPDT) switch is optimized for switching between two high-speed or low-power MIPI sources. The FSA644 is designed for the MIPI specification and allows connection to a CSI or DSI module. Applications  Cellular Phones, Smart Phones  Displays specification of FSA644BUCX Category Integrated Circuits (ICs)

EL7583IREZ-T7 Converter TFT LCD Voltage Regulator IC 2 Output 20-HTSSOP The EL7583 is a 3-channel DC/DC converter IC which is designed primarily for use in TFT-LCD applications. It features a PWM boost converter with 2.7V to 14V input capability and 5V to 17V output, which powers the column drivers and provides up to 470mA @ 12V, 370mA @ 15V from 5V supply. A pair of charge pump control circuits provide regulated outputs of VON and VOFF supplies at 8V to 40V and -5V to -40V,