PLA 3D printer filaments information:

PLA (Polylactic Acid) 3d printer filament is 100% new pure Polylactic Acid material. It is one of the most popular materials for 3D printing. Our PLA filament has a relatively low melting temperature, low warp properties and is biodegradable.

1.PLA filament has a lower melting point and prints easier than other materials. One of the most important features is that PLA is non-toxic, and even has a sweet smell when printing. PLA filament has a low shrinkage rate and it is very rigid with minimal flex. This material can print extremely high resolution models and is perfect for a wide range of uses.

2. PLA filamentis considered stronger than ABS but is more susceptible to cracking when flexing, impacted or subject to torsional loads so the mechanical needs of the print project have to be evaluated.

3. PLA filament has a huge range of vibrant colors and opacity for that perfect look whether it is artistic or utilitarian, in short a great material for 3D printing. PLA can be printed without the use of a heat bead, and can stick to glass or a PCB plate with a binder such as hairspray or white glue for a curl free print.

Application

Suitable for printing components or objects such as:Daily supplies, Art crafts, Product models, Accessories, Office supplies
PLA filaments is widely used in 3D printing, e.g. for household items, gadgets, and toys. It is better suited when flexibility is not your major requirement as it is more prone than ABS to break under pressure.

Parameter

Spool Size:

Our advantage and service:

1,All of Our 3D Printer Filament are 100% virgin material, never use recycled material or regrind material,.

2,Before the mass production, our engineer always do the test to make sure that sure that each batch of new raw materials must be printed by 3D printer.

3,The Laser diameter runs automatically to control the diameter of the filament and keeps it in a right range of 1.75 / 3.0mm, and our engineer will adjust it immediately when it alarms to indicate of wrong size, and this unqualified filament will be cut off.

4,We to keep the filaments dry, each roll of filament is packed in a vacuumed poly bag with a desiccant inside of it.

Our advantage and service:

1,All of Our 3D Printer Filament are 100% virgin material, never use recycled material or regrind material,.

2,Before the mass production, our engineer always do the test to make sure that sure that each batch of new raw materials must be printed by 3D printer.

3,The Laser diameter runs automatically to control the diameter of the filament and keeps it in a right range of 1.75 / 3.0mm, and our engineer will adjust it immediately when it alarms to indicate of wrong size, and this unqualified filament will be cut off.

4,We to keep the filaments dry, each roll of filament is packed in a vacuumed poly bag with a desiccant inside of it.