PLA Filament 3D Printer 1.75 mm 1 kg Roll for 3D Printer or Pen ± 0.03 mm Tolerance

Product Description

PLA (Polylactic Acid) 3d printer filament is 100% new pure Polylactic Acid material. It is one of the most popular materials for 3D printing. Our PLA filament has a relatively low melting temperature, low warp properties and is biodegradable.PLA filament has a lower melting point and prints easier than other materials. One of the most important features is that PLA is non-toxic, and even has a sweet smell when printing. PLA filament has a low shrinkage rate and it is very rigid with minimal flex. This material can print extremely high resolution models and is perfect for a wide range of uses.

Product Feature

1.Recommended Extrusion Temperatures: 205±15°C
2.Recommended Bed Temperature: Not needed, but if printer has 3.heated bed, 40±15 °C
4.Spool Dimensions (Approx.): 200mm Total Diameter x 50mm Inner 5.Hole Diameter x 65mm Height
6.1 kg spool
7.True Diameter: 1.75mm
8.Dimensional Accuracy: ±0.03mm
9.Density: 1.25 g/cm³
10.Volume: 0.80 L
11.Length: 334 m

Product Information

Product Advantage

PLA filament has a relatively low melting temperature compared to other thermoplastics. PLA has much less warping versus ABS, and thus a heated build platform is not required. Because a heated bed plate is not used for PLA, many users often prefer to print using blue painters tape instead of kapton tape. PLA filament generally enjoys sharper details and corners compared to ABS without the risk of cracking or warping. PLA can also be printed at higher throughput speeds.