Ribbon Fan Out MPO Multimode Fiber Optic Patch Cord Assembly FTTX
Ribbon Fan Out MPO Multimode Fiber Optic Patch Cord Assembly FTTX
We supply fiber optic patch cord, fiber optic patch cable, LC,SC/APC,ST, E2000/APC, MU, VF45, FC, MT-RJ, SC, MPO, Volition, MTP, FC/APC, ST/APC, LC/APC, E2000, DIN, D4, SMA, Escon, FDDI, RoHS compliant, LSZH, Riser, Plenum, OFNR, OFNP, simplex, duplex, single mode, 9/125, SM, multimode, MM, 50/125, 62.5/125.
Fiber Optic Patch Cord Specifications
Standards: compliant with Telcordia and IEC
Types: single mode, multimode
Terminations: FC, SC, ST, MU, LC, D4, DIN, E2000, MT-RJ, MPO, SMA, E2000, FDDI, and ESCON
Insertion Loss (dB): less than 0.3 (PC and UPC)
Exchangeability: less than 0.2 dB
Tensile Strength: less than 0.2 dB (0 to15 kgf)
Temp. Range: (- 40 to +80 degree centigrade)
Fiber Optic Patch Cable Geometric Specification
Types: PC, UPC, APC,
Radius of Curvature: 10 to 25 mm, 5 to 15 mm
Apex Offset: ≤50 um, ≤100 um
Fiber Spherical Height: -90 nm, +50 nm
Angular Offset: 8°± 0.5°C (APC)
Features of fiber optic patch cord
1. Low insertion loss and High Return Loss
2. Fully compliant with standards of IEC and YD-T826/1996
3. Temperature stability: Operating temperature: -20 to +75°C
4. High durability, more than 500 times mating.
5. Individual package with detail information label.
6. All patch cords are 100% tested
SPECIFICATIONS
|
Connector |
FC, SC, ST, LC |
|
|
UPC |
APC |
|
|
Insertion Loss |
≤0.3dB |
|
|
Return Loss |
≥50dB |
≥60dB |
|
Cable Outer Diameter(mm) |
￠0.9, ￠2.0, ￠3.0 |
|
|
Durability |
≤0.3dB(1000 matings) |
|
|
Interchangeability |
≤0.2dB |
|
|
Operating Temperature |
-40℃～+80℃ |
|
Technical Test Data
|
Test item |
Test condition |
|
Wet-resistance |
Temperature:85ºC/relative humidity 85％/14days/insertion loss≤0.1dB |
|
Temperature change |
Temperature: -40ºC~+75ºC/relative humidity 10％-80％ /42 repetitions/14days/ insertion loss≤0.1dB |
|
Water resistance |
Temperature: 43ºC, /PH5.5,/ 7days /insertion loss≤0.1dB |
|
Vibrancy |
Swing 1.52mm/frequency 10Hz～55Hz,/ X,Y,Z three directions:2 hours /insertion loss≤0.1dB |
|
Load bend |
0.454kg load/100circles insertion loss≤0.1dB |
|
Load torsion |
0.454kg load/10 circles insertion loss ≤0.1dB |
|
Tensility resistance |
0.23kg pull (nakedness fiber),1.0kg(with shell ) insertion≤0.1dB |
|
Strike |
High 1.8m,three directions ,8 in each direction/insertion loss≤0.1dB |
|
Reference standard |
Bellcore TA-NWT-001209 insertion loss≤0.1dB |
Rema Remark: The load bend and load torsion not suitable for 0.9mm patch cord or pigtail.
Orde
Fiber Optic Patch Cord, Optical Fiber Patch Cord, Fiber Optic Assemblies, Fiber Jumpers
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.