Compact structure vortex grit separator , Spiral sand water separator 27 ~ 35L/s Capacity

Use and brief introduction 
CGS type spiral sand water separator used for sewage treatment plant, the grit chamber, the grit chamber from the sand and water mixture of sand and water separation.
Structure and work principle
Process: sand and water mixture from separator at the top of the input water tank, relation between the larger sand mixture, etc will be deposited on the bottom of the u-shaped slot, under the impetus of the screw, the sand along the diagonal of the u-shaped groove bottom, after leaving the liquid level to continue goes on a distance, the river mouth after fully dehydration in sand discharge to fill sand barrels, while the water of the separation of the sand out of the overflow mouth eduction and taken to a factory into the pool.
Characteristics 
The separation efficiency can be as high as 90 ~ 98%, can isolate grains > 0.2 mm.
2. With  shaft screw, no water bearing, maintenance is convenient.
3. Compact structure, light weight.
4. The new type of transmission device, its key parts - the shaft of the reducer for advanced mounted.No coupling, easy installation and pairs
Article

5. The lining is fast loading type, easy to replace.
6. Adjustable screw axial location, easy to adjust its tail and the walls of security clearance.

Specifications: