1200ml ultrasonic cleraner for surgical instrument jewelry glasses watch fruit cleaning CE ROHS FCC PSE

Features:

1. Cute apperance
2. Digital panel control,5 interval time adjustable
3. High quality with SUS304 tank
4. Small capacity, household ultrasonic cleaner
5.Auto shutoff
6.Power High and normal settings
7.Includes basket,lid,holder and tweezers
8.Open the lid manually

9.1200ml big capacity, available for fruit vegetables clean
10. Degas function
11. 70W ultrasonic power, thoroughly cleaning
12. Better for health,a good choice for gift

13.Touch control panel

14.Transparent lid to observe the whole cleaning process

15,1 year warranty,and parts free to send for fix.
16,FCC CE ROHS ISO9001 SGS certification

Specification:

Applications:

Products details:

Packing:

1pcs/ color box; 4pcs / carton
Package Type:
Packing include
1ultrasonic cleaner
1 Power cord
1basket
1 English manuel

Suggested Ultrasonic Cleaning Procedure

In all cases manufacturers’ instructions should be followed when using an ultrasonic cleaning process. These are representative steps.

Fill the ultrasonic cleaning tank with an approved medical instrument cleaning solution such as CLN-LR012 available from Tovatech following dilution instructions provided. Turn the cleaner on to start the degassing process. This step removes entrained air in new solutions that interferes with the efficiency of cavitation and takes approximately 10 minutes.

In the meantime:

• Segregate instruments by alloy or composition to avoid potential damage (Chromium plated instruments should not be cleaned ultrasonically)
• Instruments with movable parts should be disassembled to facilitate cleaning
• Place the instruments the ultrasonic cleaner’s mesh basket, taking care that they do not come in contact with each other
• Cannulated or lumened instruments should be positioned to insure interiors are wetted with the cleaning solution. In some instances placing them on an angle will facilitate this
• Set the control panel per manufacturers’ instructions and start the cleaning process

At the end of the cycle, remove the instruments from the ultrasonic cleaning bath and thoroughly rinse them to remove all traces of the cleaning solution. Deionized water rinses will avoid spotting. If the instruments are not to be immediately disinfected and sterilized be certain that they are thoroughly dried and protected. Part reassembly can occur after sterilization.

Procedures should be in place to guide the replacement of used ultrasonic cleaning solutions. In some instances it is recommended that solution be drained and tanks thoroughly cleaned and dried after each ultrasonic cleaning cycle. Most solutions available today are biodegradable, which facilitates disposal but local authorities should be consulted on proper practices.