IP20 Ceiling Emergency Light Permanent / Non - Permanent LED Lamp High Brightness
IP20 3 Hours Operation LED Emergency Light, Permanent / Non-permanent LED Lamp
Product Specification
|
Operation |
Non-maintained |
|
Input Voltage |
110V-127V 50/60Hz; 220V-240V 50/60Hz |
|
Charging Current |
40mA(Nominal) |
|
Lamp type |
1 watt SMD White LED |
|
Battery |
Nickel-mH Battery 3.6V 1.6Ah 1.0AH |
|
Indicator |
Red LED Indicates Charging |
|
Duration Time |
More than 3 hours |
|
Construction |
Electro-galvanized Steel Casing with Corrosion Resistant Epoxy Spray Coating; PC Plate |
|
IP Rate |
IP20 |
|
Installation |
Ceiling Recessed Mounted |
|
Weight |
0.5 kg |
|
Working Temperature |
-10℃ to 60℃ |
|
Size |
350mm×110mm×38mm Tolerance ±0.03mm |
|
Customization |
Battery, Duration Time, Package, Wire length |
Technical Parameters:
- Input Power: AC 220V-240V 50Hz / 60Hz
- Light source:3W high power LED
- Emergency time ≥180 minutes
- emergency conversion time ≤IS
- Emergency switching voltage: AC 144V-204V 50Hz / 60Hz
- Battery: Ni-mH 3.6V / 1600mA
- Installing hole size: Ф75mm
Operating Manual
- Disconnect the AC power during installation.
- This product should not be installed in places such as outdoors ,humid and corrosive gas and so on.
- This product should use the separate loop-powered circuit.It should not share circuit with lighting or other electrical equipment (with a switch), in order to ensure this LED emergency Ceiling light can be recharged normally.
- To ensure the product operating normally,it should be checked regularly.
- The products have been discharged before leaving the factory.So it needs to be charged 24 hours when used .
- If the product is in storage or not use for a long time, it should be charged and discharged once every three months, in order to protect the battery performance.
- Please keep this manual.
Product Show:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.