Fabric Surface Demountable Mobile Foldable Partition Wall For Church

Price Negotiable

Price: $82-88 per square meter

MOQ: NO MOQ, small quantity welcome

Delivery Time: 7-15 days

Brand: EBUNGE

Product Description

Fabric Surface Demountable Mobile Foldable Partition Wall for Church

How to maintain the foldable partition walls?

1. Clean & lightly lubricate all track running surfaces.

2. Check trolleys for any signs of abnormal wear or breakage. Replace as needed.

3. Check foldable partition wall panels "out of plumb" (indicating loose trolley bolts). Correct by adjusting to plumb and tightening trolley nuts.

4. Check any exposed bolts on foldable partition wall panel's vertical edges and tighten if required.

5. Check for foldable partition wall track misalignment at all joints & intersections and adjust if needed.

6. Check lever closure and adjust as needed.

7. Check and make sure all top & bottom seals are functioning properly.

8. Operate pass door and adjust as needed.

9. Check for torn vinyl / fabric and repair or replace as needed.

10. Contact with us if the problem can’t be solved by the owner.

Technical Information

Series	BG65	BG85	BG100
Panel suspension	Top hung only	Top hung only	Top hung only
Track system	Single or twin point	Single or twin point	Single or twin point
Panel thickness	65mm	80mm / 85mm	100mm
Panel height	Up to 4000mm	Up to 6000mm	Up to 18000mm
Max height	4000mm	6000mm	18000mm
Panel width	600-1230mm	600-1230mm	600-1230mm
Frame construction	Aluminum frame	Aluminum frame	Aluminum frame
Face material	9mm	9mm / 12mm	12mm
Fire safety	Optional Class I or O	Optional Class I or O	Optional Class I or O
Vertical profiles	Aluminum anodised with sealing profiles	Aluminum anodised with sealing profiles	Aluminum anodised with sealing profiles
Retractable seals	Aluminum black with double rubber seals	Aluminum black with double rubber seals	Aluminum black with double rubber seals
Operation of seals	Manual, with supplied operating handle	Manual, with supplied operating handle	Manual, with supplied operating handle
Locking	Optional lock to pass doors	Optional lock to pass doors	Optional lock to pass doors
Pass doors	Single open in panel or double open in two panel	Single open in panel or double open in two panel	Single open in panel or double open in two panel
Sound insulation	20-32dB Rw	28-36dB Rw	32-50dB Rw
Weight	Approx 22-35kg/sq M	Approx 25-40kg/sq M	Approx30-48kg/sq M
Finish Material	Plywood, MDF, Laminate, Melamine, Gypsum board, Fabric, Leather, Insulation board, Fireproof board, Wall paper, Vinyl, Painting, etc. (Customized)

Foldable partition wall solution

PROBLEM	POSSIBLE CAUSE	PROBABLE SOLUTION
Panels Hanging out of plumb.	1. Loose or broken trolleys. 2. Broken Trolley Support Beam.	1. Tighten loose carries to return panel to plumb. 2. Replace any broken carriers or support beam.
Panels sticking or hard to move.	1. Dirt in the track. 2.less lubricate oil.3. Misaligned track joints. 3. Trolley Broken.	1. Clean track. 2.Spread lubricate oil on the track.2. Align joints. 3. Replace trolley.
Abnormal noise during movement.	1. Broken trolley 2. Misaligned track joints	1. Replace trolley 2. Align joints
Top and bottom seal inoperative	1.Cranking mechanism stripped / broken link to mechanism 2.top seal stuck by the trolley support beam	1. Straighten or replace seal. /. Replace 2.Adjust the size of the hole located on the top seal
Pass doors not latching	1. Strike plate out of adjustment. 2.door jamb over pressure compressed.	1. Readjust strike plate. 2. Reverse previous step to re position the pass door,and not compress the LCP to much pressure
Broken or worn trolleys	1. Bad track joints. 2. 2. Abusive handling at "T" or "L" intersections.	1. Realign track joints & replace trolleys. 2. Replace trolleys and retrain personnel.
Lever closure jamb not extending or operates difficult.	1. Internal mechanism stripped. 2. Limit cables or chains tangled. 3. Tension bolts too tight.	1. Replace mechanism. 2. Adjust limit chains. 3. Adjust tension bolts on mechanism.