0.4-1.2mm Width Adjustable CU Stud And Track Drywall Roll Forming Machine With Fly Punching And Cutting
0.4-1.2mm Width Adjustable CU Stud And Track Drywall Roll Forming Machine With Fly Punching And Cutting
Stud Track Drywall machine is used to plaster board, gypsum board and other decorative finishes lightweight board made of non-load-bearing walls and roof of the building style decoration, a variety of decorative building roof shape, inside and outside the building wall and ceiling scaffolding base material.Products made by this machine are suitable to use in hotels, theaters, shopping malls, factories, office buildings, old building renovation, interior decoration settings, roof and other places.
Gypsum Board Drywall Partition Ceiling System Machine is widely is widely used to produce C U drywall machine, Main c channel machine,wall angle machine, roof batten machine, T bar machine, etc.
The C U drywall machine can do material thickness 0.4-1.2mm with raw material Cold-rolled Steel, Galvanized Coil, PPGI. Also can do C U size width adjustable automatically, just put different feeding coil width.
The machine includes decoiler, Feeding and Leveling Device, main forming machine, hydraulic cutting device, the Frequency converter controls the motor speed, the PLC system controls length and quantity automatically.
Our produced profile meet ISO, CE , UL standards, and our machine is applied to steel structure, industry or home.
Technical Parameter
| Items | Specifications | |
| Material of coil | Material Thickness | 0.4-1.2mm G550 Galvanized coils |
| Punching device | Hydraulic punching device | 1 set |
| Forming system | Rolling Speed | 20 m/min with driven chain |
| Roller Stations | About 16 stations forming | |
| Roller Material | Gcr15 Steel with quenching | |
| Shaft Material |
45# Steel Diameter 75mm shaft
|
|
| Main Motor Power | 7.5 kw | |
|
Cutting |
Material Of Cutting | CR12 with quench treatment |
| Hardness | HRC58-62 | |
| Tolerance | +-1.5mm | |
| Cutting blade | 1 set of cutting blade | |
| Electrical control system | Electric Source | 220V, 60HZ,3 phase, according to buyer’s request |
| Control System | PLC with touch screen | |
| Weight | About 5 tons | |
| Way Of Drive | 1 inch single chain | |
| Size of machine | Length 8000mm* Width 800mm* Height 1200m |
Machine List
| 3 tons passive de-coiler | 1 set |
| Main roll forming machine | 1 set |
| PLC Control box | 1 unit |
| Fly cutting device | 1 unit |
| Fly punching device | 1 unit |
| 6 meters Simple auto stacker | 1 unit |
Profile Drawing
Technological process:
Decoiler—Feeding with guide —Roll forming—Fly punching and cutting—Products collecting
Machine Pictures
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.