8 M / Min Cable Tray Rolling Forming Machine 80 - 600mm Profile Width Around 20 Tons
Our lines are featured with cassette design (Subjected to client’s requirement), allow you to change quickly a profile to another. A multi-stage punching machine or a standard hydraulic press can be chosen in the punching stage per actual product. A fly shear/Saw is also optional up to the client.
Brief introduction
This cable tray roll forming machine is a professional roll forming machine for steel sheet cold-form industries. It can continuous form the steel sheet according to customer’s requirement, automatically cut to length. This equipment has many advantages, such as high forming speed, low noise, stable transmission, easy operation, good look etc.
This machine is able to roll form two different profile(tray&cap) by adjusting the rollers.
Technical parameters
| NO. | Item | Parameter | Remark | |
|
1 |
Suitable material |
Type | Galvanised/Color steel sheet | |
| Thickness(mm) | 0.7-2.0 | |||
| Yield stress(Mpa) | 235 | |||
| Width (mm) | 140-840 | |||
| 2 | Producing speed (m/min) | 3-5m/min | including the time of cutting&punching | |
| 3 | Main machine motor(KW) | 15 | Depend on actual design | |
| 4 | Leveling motor power(KW) | 1.5 | Depend on actual design | |
| 5 | Main hydraulic station motor power(KW) | 7.5 | Depend on actual design | |
| 6 | Punching hydraulic power(KW) | 44 | Depend on actual design | |
| 7 | Conveying motor power(KW) | 2.2 | ||
| 8 | Active output power(KW) | 1.5 | ||
| 8 | Total power(KW) | 75 | Depend on actual design | |
| 10 | Power | AC380V,50HZ, 3P | ||
| 11 | External dimensions(L×W×H,m) | 32×6×2 | Depend on actual design | |
Component list
| Name | Model | Quantity | Discription |
| 1.Decoiler | Cantilever model 5T | 1 set | Cantilever,hydraulic,passive decoiling, with pressing arm and coil car. |
| 2.Roll forming system | Leveler | 1 set |
Roller material:GCr15 steel being heat treatment, with digital-controlled procession, which ensures the rollers’ hardness to be HR60 and durable Shaft:#45 steel roller stands:column Motor drive,with chain connection&gear. Cr12 mould steel with quenched treatment 500T hydraulic presser,press at speed of 20 times /min,Power 30KW, with 16sets of mould
|
| Punching | 1 set | ||
| Pre-punching system | 1 set | ||
| Servo feeder | 1 set | ||
| Guiding device | 1 set | ||
| Clamping roll | 1 set | ||
| Roll forming system | 1 set | ||
| Post-cutting system | 1 set | ||
| 3.Out put system | Supporting table | 2 sets | |
| 4.Hydraulic system | 1 set | The decoiler and main roll former share one station, presser use another station. | |
| 5.Electrical system | 1set |
1.PLC control,Encoder set length 2.interface:touchpad+button 3.AC inverter |
|
Working Flow of Roll Forming Machine
Profile drawing of cable tray
Photo Gallery
Product drawing
Our After-Sales Service Commitments
1.Guidelines for installation and commissioning of equipment:
Based on the actual situation, to assist and guide the Buyer and Buyer’s technical personnel in the overall installation location, the installation of equipment, and provide Buyer with answers to their questions and related issues;
2.Provide training for operation and maintenance personnel:
Based on the Buyer’s request, Sussman will provide free of charge training of the operation and maintenance personnel;
a) The User (Buyer) can send their operation and maintenance personnel to our factory for learning and training;
b) When Sussman is doing the installation and test running of the equipment for the Buyer, the Buyer can send their personnel to participate.
3.If failure occurs in any of the machines during the “three guarantees” period(one year), then, upon the Buyer’s request, Sussman will eliminate the failure;
4. Sussman will inform all its Buyers about any upgrades and significant product improvements. Sussman will provide equipment modifications based on their costs. Sussman will provide Buyers with high-quality after-sales services in a careful and responsible attitude, provide very strong guarantee for the Buyer’s normal production.
FAQ
1) Q: Are you manufacturer or trading company?
A: We are manufacturer and trading company .
2) Q: Do you provide installing and training overseas?
A: Overseas machine install and worker training services are optional.
3) Q: How is your after sales support?
A: We provide technical support on line as well as overseas services by skillful technicians.
4)Q: How does your factory do regarding quality control?
A: There is no tolerance regarding quality control. Quality control complies with ISO9001. Every machine has to past testing running before it's packed for shipment.
5) How can I trust you that machines pasted testing running before shipping?
A: 1) We record the testing video for your reference. Or,
2) We welcome your visit us and test machine by yourself in our factory.
6) Q: Do you sell only standard machines?
A: No. Most machines are made to order.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.