Widely Used Solor Strut Roll Forming Machine Profile Thickness 1.5-2.5mm

Make the four sizes in one machine

TECHNICAL SPECIFICATION

A, Technical Parameter:

Forming thickness: 1.5-2.5mm,galvanized coils yield strength≤G250MPa

working speed: 14M/min(not include cutting and punching stop time)

Hydraulic punching device: 1 set

roller stations: about 16 station main roller

levelling device: 7 roller levelling

material of roller: bearing steel, quenching treatment.

material of main shaft: 45# fine steel,

diameter of main axis: ￠75mm

main motor power: 7.5kW

motor power of hydraulic station: 4KW

hydraulic station pressure: 12MPa

electric control system: whole line adopted PLC control, Panasonic PLC

cutting type: hydraulic drive, cut after forming

material of cutting blade: Cr12 , quenching process

B,Main structure and characters:

This channel machine is composed by 3T passive uncoiler punching station, main forming machine,cutting unit, hydraulic station,computer cabinet,output table.

One machine can produce several shape products as panel profile.

The different size of channel is adjusted by the spacers between up and downside rollers. Because the design of these spacers is half circle, then two joint together, so when adjusting, needn’t remove the rollers, so it is very easy and convenient.

Due to cutting after forming, so when change different specification, need to change the cutting mould.

C, Flow Chart:

Uncoiling – infeed guiding – levelling - punching – roll forming – hydraulic cutting – output table

Profile samples

Machine products