Waterproof Metal Dome Membrane Switch / Thin Shape Membrane Panel Switch
Waterproof Metal Dome Membrane Switch / Thin Shape Membrane Panel Switch
Metal Dome Membrane Switch Introduction
Metal Dome Membrane Switch is an electrical switch for turning a circuit on and off. It differs from a mechanical switch, which is usually made of copper and plastic parts: a membrane switch is a circuit printed on PET or ITO. The ink used for screen printing is usually copper / silver / graphite filled and therefore conductive
Metal Dome Membrane Switch Specification
| op Adhesive | PET Double-sided Tape | 0.10/.125mm | |
| Paper Double-sided Tape | 0.10mm | ||
| Transfer Tape | 0.06/.12mm | ||
| Retainer | PET | Glossy | 0.125mm |
| Spacer | PET Double-sided Tape | 0.225/.275mm | |
| Circuit Layer | PET | Glossy | 0.125mm |
| Rear Adhesive | Paper Double-sided Tape | 0.10mm | |
| Transfer Tape | 0.06/.12mm | ||
| Connector | Pin | 2.54mm Metal,Male/Female | |
| Housing | Female,2.54mm |
Metal Dome Membrane Switch Electrical Performances
|
Wire Resistance
|
0.5mm width,<1Ω/cm | Rated Current | 25-100mA,0-30V DC |
|
Insulation Resistance
|
>100MΩ 250V DC | Working Voltage | <50V DC |
|
Non-tactile Switch
|
0.1-0.4mm | Tactile Switch | 0.4-1.0mm |
|
Working Life
|
Working Life | Working Temperature | -40℃ ~ 70℃ |
|
Working Humidity
|
40℃,98%RH No influence | Substrate Voltage | 1500V DC |
|
Feedback Time
|
10ms | Tail Folding | R>1,180 |
Packaging & Delivery
packaging details: inside,shockproof package, PE bag
outside,thickened carton, water-proof
delivery details: express,2-4 working days
air freight,5-7 working days
sea freight,25 working days
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.