Medical Instruments 0.3mm Tactile Membrane Switch
0.3mm Tactile Membrane Switch Overlay For Medical Instruments
Tactile Membrane Switch
| Membrane switch design | |
| Material | PET(polyester),PC(polycarbonate) |
| Dimension | According to customer's demand,OEM service |
| Color | Pantone and RALcolor matching system. |
| Rear Adhesive | 3M467,3M468,3M9448 ect |
| Features | 1)with metal dome, |
| 2)Key:embossed or flat | |
| 3)screen printing | |
| 4)with clear or transparent window | |
| 5)glossy surface or matte surface | |
| 6)Standard Tolerances:+/- 0.10inch(+/-0.25mm) | |
Tactile Membrane Switch Strength:
1, Pressing life-span is over ten hundred thousand times.
2, Have the characteristics of the function stabilizes.
3, Handle reliably and good tactility feeling.
4, Customised design
Technology:
Operating voltage: 35V DC
Operating current: 100mA 1W
Contact resistance: < 100 Ohms
Open circuit resistance: ≥ 10MΩ at 100V
Operating temperature: Flat/Metal dome:-20°c to +80°c
Storage temperature: Flat/Metal dome:-40°cto +80°c
Life expectancy Flat type≥5,000,000 times Tactile type≥1,000,000 times
Switch stroke: 0.1 to 0.6mm
Contact bounce: 5 to 30ms
Actcuation force tolerane: +/- 20 to 45g
Tactile ratio: FC > 40%
Operating humidity: up to 95% RH
Female, male connector, solder pins and heat seal connectors are available
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.