ZK108AB ( adhesive A and B)

Each group: 2 kgs

Units: group

A agent sticky degree: 10000-15000 CPS

The view: the transparent liquid body

B agent sticky degree: 3000-4000 CPS

Color:transparent

Combined ratio: A:B=1:1 (weight ratio)

Application:bond,repair tooling board and metal, plastic, etc.,

Performance:High strength, impact resistance, rich toughness

Handling time: 30minutes (100 g, 25 ℃)

Initial period hard occurs between: 4 hours

Compressive strength: 280-300(kg/cm2)

Bonding strength : 85 (kg/cm2)

Bend curved strength: 112 (kg/cm2)

Temperature resistance : 100 ℃

Hard degree: 80 (SHORED)

Density:1.15 g/cm3(25 ℃)

First,use methods:

1.Ensure that the surface is clean and dry and free of dust and swarf.

2.Mix agent A and agent B base on weight ratio:(A:B=1:1) and stir well.

3.Brush, spread or spray on to both faces to be bonded.

4.Bring two board faces together promptly. If necessary, clamp the boards together to ensure a perfect bond.

5.can’t move the bonded board within least one hour, otherwise you will seriously affect bonding effect.

6.in general,the bonded board can be machined after completely hardened, 24 hours.

Second, note:

1. A, B two agent shall be stored in the shade.

2. A, B two agent, such as A large number of mixed, can rapid curing, should be careful,do trial test first.

3. After the use, such as skin resin was bonded on it, should with soap cleaning.

4. Can’t mix glue tools or containers.