Inconel 718 forging part UNS N07718 2.4668
-
Inconel* 718 (UNS N07718) forging
Introduction
Inconel 718 is a nickel-chromium-molybdenum alloy designed to resist a wide range of severely corrosive environments, pitting and crevice corrosion. This nickel steel alloy also displays exceptionally high yield, tensile, and creep-rupture properties at high temperatures. This nickel alloy is used from cryogenic temperatures up to long term service at 1200° F. One of the distinguishing features of Inconel 718’s composition is the addition of niobium to permit age hardening which allows annealing and welding without spontaneous hardening during heating and cooling. The addition of niobium acts with the molybdenum to stiffen the alloy’s matrix and provide high strength without a strengthening heat treatment. Other popular nickel-chromium alloys are age hardened through the addition of aluminum and titanium. This nickel steel alloy is readily fabricated and may be welded in either the annealed or precipitation (age) hardened condition. This superalloy is used in a variety of industries such as aerospace, chemical processing, marine engineering, pollution-control equipment, and nuclear reactors.
Character
- Good mechanical properties – tensile, fatigue and creep-rupture
- Yield tensile strength, creep, and rupture strength properties are exceedingly high
- Highly resistant to chloride and sulfide stress corrosion cracking
- Resistant to aqueous corrosion and chloride ion stress corrosion cracking
- High temperature resistant
- Age-hardenable with a unique property of slow aging response that permits heating and cooling during annealing without the danger of cracking.
- Excellent welding characteristics, resistant to postweld age cracking
Application
- Chemical processing
- Aerospace
- Liquid fuel rocket motor components
- Pollution-control equipment
- Nuclear reactors
- Cryogenic storage tanks
- Valves, fasteners, springs, mandrels, tubing hangers
- Well head completion equipment and blow out preventers (BOP’s)
- Gas turbine engine parts
Equal grade
Alloy 718, Haynes 718, Nicrofer 5219, Allvac 718, Altemp 718, GH4169, UNS N07718
Chemical composition (%)
Nickel (plus Cobalt) .......................................................50.00-55.00
Chromium......................................................................17.00-21.00
Iron .....................................................................................Balance*
Niobium (plus Tantalum)....................................................4.75-5.50
Molybdenum .....................................................................2.80-3.30
Titanium.............................................................................0.65-1.15
Aluminum ..........................................................................0.20-0.80
Cobalt ...............................................................................1.00 max.
Carbon..............................................................................0.08 max.
Manganese .......................................................................0.35 max.
Silicon ...............................................................................0.35 max.
Phosphorus.....................................................................0.015 max.
Sulfur...............................................................................0.015 max.
Boron ..............................................................................0.006 max.
Copper..............................................................................0.30 max.
Standards
Rod, Bar, Wire and Forging Stock - ASTM B 637, ASME SB 637, SAE AMS 5662, SAE AMS 5663, SAE AMS 5664, SAE AMS 5832, SAE AMS 5914, SAE AMS 5962
Plate, Sheet and Strip - ASTM B 670, ASTM B 906, ASME SB 670, ASME SB 906, SAE AMS 5596, SAE AMS 5597, SAE AMS 5950
Pipe and Tube - SAE AMS 5589, SAE AMS 5590
Forms available at A-one Alloy
Plate, sheet, strip, wire, rod, bar, forging, pipe, tube, fitting, powder
Delivery
Plenty of bars and forging in stock. For delivery of other products please contact A-one Alloy for confirmation.
* MONEL, INCONEL, and INCOFLUX aretrademarks of the Special Metals Corporation group of companies.
-
About XUNSHI![]()
![]()
![]()
Suzhou Xunshi New Material Co. Ltd- referred as XUNSHI hereafter, is a professional manufacturer of high-performance alloy products. XUNSHI is engaged in supplying high quality and cost-effective Superalloy, Anti-Corrosion Alloy, Precision Alloy, Special Stainless Steel and Magnetostrictive Material to customers worldwide.
Why XUNSHI
· Highly experienced in alloy industry
· Top experts of industry in China
· Advanced technology and process from top famous institutes in China
· Advanced devices through whole production and inspection process
· Strict quality control system
· Company motto: best service, most value
· Smart sales policy
Service Items of XUNSHI
· Non-standard product research and pre-production
· Fabrication of products
· Cutting, splitting for sheets and plates in stock
· Heat treatment (Solution treatment, aging harden treatment, anneal, spring temper, quench etc.)
· Surface finish (peeling, gridding, polishing)
· Logistics service
· Customized packing service (also for exporting)
· Import and export (XUNSHI is certificated)
· Document translation
· Hard-to-find material sourcing
Customers of XUNSHI
Customers of XUNSHI are all over China (Taiwan and Hong Kong included). And we are exporting to USA, Canada, Italy, UK, Poland, Greece, Russia, Turkey, Iran, Israel, South Africa, South Korea, North Korea, India, Argentina, and Brazil and so on. Customers from 30+ countries trust us.
Where is XUNSHI
A- XUNSHI is in Huaqiao, Kunshan, 215332 China, which is very closed to Shanghai.
B- Xunshi is around 80KM from Shanghai Pudong International Airport (PVG).
C- 20KM from Shanghai Hongqiao Airport
D- 20KM from Shanghai Hongqiao Railway Station
E- You can contact XUNSHI sales for a pickup service.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.