PE plasticover carpet protection film 3/4 mil auto carpet plastic sheet

Description

Auto carpet protection film is a multi-layer heavy duty ,easy application and removable polyethylene film with dealer must remove printing and perforation ,the perforation at certain distance makes it can be teared off by hand to square size suitable for vehicles easily .just protect vehicles from unwanted mud ,filth ,dust ,paint ,etc.

 Auto carpet protection film is a fast, easy and effective way to protect a vehicle's carpeting from tracked in mud, oil, grease and moisture. This protective film comes in many different sizes.

Specification for Pe Printing Protective Film

Features

1. Auto Car Carpet Floor Mat: Printed with the standard "Dealer Must Remove" text and Perforated every 24" for easy application can be used in car, RV, homes, boat, more they will keep your carpets safe from spillages, paint drips, mud, dust and debris
2. High quality :our adhesive floor mat is made from the best quality 4 mil polyethylene available in the market ,this is why our products is long lasting &durable ,protects carpets /mats/Rugs from water ,paint ,stains ,dust and dirt
3. Easy installation :our high quality No-curl material is easier and faster to apply with less waste than competitor’s products easy for one person to apply ,that makes our products more comfortable to use
4. For all surfaces:Proprietary adhesive provides the best application and leaves no reside upon removal is a long-lasting self-adhering solution for all types of carpeting and other surfaces that require a high tack adhesive
5. Available Sizes:our premium automotive carpet protection film is designed to protect your car’s carpet not only from normal wear and tear ,but also from the dust ,grime,soil,water,or oil that typically collects on the vehicle’s carpet .available in different lengths such as 200”300”350”500”&600”length

Pictures

Technical data

1. Adhesion: ›7.5N/25mm, 28oz/inch (793.8g/25mm normally).

2. Tack:10# Steel Ball

3. Cohesion:›72hours

4. Tensile Strength: ›18MPa, 2000psi (13.79Mpa normally).

5. Elongation at break: ›350%, 400 %( normally).

6. Product shelf life is 18 months from date of manufacture under normal conditions of 70℉ and 50% relative humidity.

Processing

1. Film -Blowing

2. Printing

3. Glue coating

4. Testing

5. Rewinding

6. Cutting

7. Shipping

Contact

Sophie Liu
E-mail:Sophie@shire-plastic.com
Phone/Wechat/Whatsapp:+0086-13645832408