UL C-UL list IEC 5Jacks 15A Overload Protector Outlets Power Strip
Aluminium Alloy UL approved American 5 Way Outlets Power Strip with Rocker Switch
![]()
Specifications
Specificationsaluminium alloy UL approved power strips and with surge protective devices type 3 SPD. 4way,6way,8way,9way,10way,12way,15way,16w
SFC Jiashan Shengfeng Plastics & Electronics Co., Ltd SFC306-X series power strip offers 15 amp, 125V multi-outlet AC power distribution in a convenient 12 to 72 inch mountable housing. Offers horizontal or vertical power distribution in rackmount, raceway, laptops cart and workbench applications etc. Includes6 to 16 NEMA 5-15R output receptacles with any inch center -to-center spacing, 5-25ft AC line cord and lighted power switch with circuit breaker and locking transparent cover to prevent accidental shutoff. Sturdy all-metal extruded aluminum housing stands up to demanding network, laboratory or factory environments.
Specifications
| OUTPUT | |
| Frequency compatibility | 50/60Hz |
| Output watts | 2400W |
| Output volt amp capacity (amps) | 10A 13A 15A 16A |
| Outlet quantity / type | 5*IEC320 C13 |
| Outlet spacing | any in. |
| INPUT | |
| Recommended Electrical Service | 15A 125V/13A 250V/16A 250V/10A 240V |
| Input connection type | IEC 320 C14 |
| Input plug features | Black or other |
| Input cord length (ft.) | 5 to 25 |
| Input Housing length (in) | 12-1/4 to 72 |
| Input cord gauge, type | 14AWG/3 SJT |
| Voltage compatibility (VAC) | 125 |
| LAMP ALARMS & SWITCHES | |
| Rock Switches with circuit breaker and lamp | Lighted 2 position switch controls power to all outlets |
| Locking switch cover | Transparent on/off switch cover prevents accidental turn-off |
| PHYSICAL | |
| Unit Dimensions (HWL/mm) | 32*60*L/34*43*L |
| Material of construction | Aluminum |
| Mounting accessories included | Includes mounting clips |
| Receptacle Color | Black or other |
| AC line cord color | Black or other |
| Form factors supported | Supports vertical or horizontal mounting in rack enclosures, raceways, laptops cat and a variety of other applications |
| CERTIFICATIONS | |
| Power Tap | IEC |
| Approved by | UL C-UL CB |
INSTALLATION GUIDE:
Before installation, you may need to get a IEC C13 Outlet. Decide your wire gauge, and ask store attendant for assistance what color of connectors you should get) from your local hardware or electric supply or home improvement stores.
Minimum tools required: A fine to medium fine philips screw driver, and a pair of scissors, and a pair of mid size slip joint pliers
1. Turn off electricity in the house
2. Decide where to place this unit
3. Choose the side you want the cord exit to choose IEC C14 Built in power strips
4. Match the color of the wires and secure the wire connection with proper wire connectors built in IEC C13 plug.(different wire gauge use different colored wire connectors)
- Mount the power strip where you want it to be:
A) For power strips with mounting tabs on both ends: screw down the unit on the floor, wall or in your cabinet or on your rack, where you want it to be
B) For power strips without mounting tabs, but to be mounted with clips, place the unit where you want it to be first, make marks where to install the clips, which normally should be placed about min 2”<power strips length away from each end, and then screw the clips down with screws provided. Then, snap the power strip in on the clips - Push IEC C13 outlet plug into IEC C13 inlet power strips , and push switch to ON. Turn electricity back on, you are ready to go.
Note:
We also custom manufacture for our customers.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.