Microprocessor Controlled Solar Aviation Obstruction Light Low Intensity Remote Control ON/OFF
This LED Low-intensity Double Solar Aviation Obstruction light is adopting high efficient mono crystalline silicon solar panel, cooperate with solar dedicated lithium ion battery as power supply.There are two lamps on the battery box, one is main lamp, another is standby. When main lamp fail,standby light turn on automatically. 3/4inch thread hole under base is very suitable for pole mounting.
Compliance
** ICAO Annex 14 Volume 1, Sixth edition, 2013, table 6.3 Low Intensity Type A / B Obstruction Light
** FAA L-810
Electrical
* LED as light source, life experience >100,000hours
Physical
With bird needle to prevent bird drop
UV & vibrations protected polycarbonate lens for converging light
Stainless steel 304 base, light fastness, resist snow and rain
Mono crystalline silicon solar panel, conversion efficiency is better than poly crystalline silicon
Solar panel angel is adjustable (Vertical 15-90° )
System design
♦ Solar panel as photocell (Photo diode) for day & night working mode (dusk to dawn mode)
♦ ON/OFF button make local control easy
♦ Flashing(20fpm)/steady toggle switch under base
♦ Main-standby mode
Optional
► GSM cellphone monitoring
► Infrared LED for pilot using NVG(Night Vision Goggles)
► Remote control ON/OFF
Application
AH-LS/DE solar low-intensity light is specialized used on the top of the High Chimney, Telecommunication tower, Wind Turbine where there is no cable power supply and those facilities which have high requirements on lightning protection.
Used alone on the top of obstacle which height is less than 45meter
More product parameter:
| Intensity(cd) | ≥32.5cd |
| Flash Characteristics | Steady/Flashing(20fpm) adjustable |
| Solar Module Type | Mono crystalline Silicon |
| Output(watts) | 6 |
| Charging Regulation | Microprocessor controlled |
| Battery type | Lithium ion battery |
| Nominal Voltage (V) | 12 |
| Battery Service Life | Average 3 years |
| Autonomy (hours) | Steady: 80, Flashing: 200 |
| Lamb Body Material | UV protected Polycarbonate |
| Base Material | Powder-coated Die-casting aluminum |
| Overall Size (mm) | 260*300*400 |
| Installation Size | 98×98×θ12 & 3/4inch thread |
| Product Life Expectancy | Average 5 years |
| Ambient Temperature(℃) | -35~70 |
| Humidity | 0~100% |
| Wind Speed | 80m/s |
| Waterproof | IP65 |
Our service:
Delivery:
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.