Internally Illuminated Heliport Wind Cone Helipad Landing Lights obstruction light on top for aircraft warning

Compliance

ICAO Annex 14 Volume ǁ Heliports 5.1.1

FAA AC 150/5390-2B Heliport Design Guide

FAA 150_5345_27e FAA SPECIFICATION FOR WIND CONE ASSEMBLIES

An aerodrome shall be equipped with at least one wind cone as wind direction indicator. The flood light for illumination is inside wind sock, it will rotate together with windsock too.  One obstruction light on top for aircraft warning.

This specification covers fabric windsocks and their supporting structures used at airports and heliports to indicate surface wind conditions.

Features of Helipad Landing Lights

Power supply available in DC(12-48VDC) or AC(110-240VAC)

Pole is made of corrosion resistance and wind resistance stainless steel 304(SS316 is optional)

One obstruction light on top, one flood light for illumination

Pole height is customized(1meter, 2meter, 2.5m, 3m, 4m, 5m...)

Windsock color is: orange(Nylon), red/white(PVC)

Windsock dimension:

   Pole height:＜4m, Length: 1.2m, big diameter: 300mm, small diameter: 150mm

   Pole height: 4m-6m, Length: 2.4m, big diameter: 600mm, small diameter: 300mm

   Pole height: ＞6m, Length: 3.6m, big diameter: 900mm, small diameter: 450mm

Other size is customized.

Frangible coupling is optional

Optional: 3 Metllaic cord for ground fixation at 120°space

Optional: Extra movable part of the base to be rotated to 90°to lower the windsock for maintenance

The wind direction indicator should be in the form of a truncated cone made of fabric and should have a length of not less than 3.6 m and a diameter, at the larger end, of not less than 0.9 m. It should be constructed so that it gives a clear indication of the direction of the surface wind and a general indication of the wind speed. 

Datasheet download: